Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Hi Unregistered,
On July 29th, this site will be moving..! No, really - it's "moving" to another physical location - including servers, gateways, routers - everything - including my coffee cup...
So, from the date of July 29th through July 30 or 31 (shooting for these dates, but - as always, I'm at the mercy of my ISP who has to install the lines to the new location - and we actually get them running ;) ). But - this site, cloud servers and main web will be OFF LINE.
Now, please save these dates!! Please - don't be "that guy" who emails me on the 30th to tell me you "can't open the Parker Website". I'll already know it is offline - and also know that you are "that guy"...
I'll take this notice up and down over the next week or so - and leave it up during the final few days before shutting it off on the 29th..
This VH 20 had had it's stock cut about 2 1/4" many years ago (for a youth or lady?). At some point the original butt was reattached but a very noticeable glue line, not the best job. I love the gun but, ugh, the glue line. Just got it back, my guy went a little overboard on the wood for a V gun but I'm not going to complain, I'm gonna eat quail.
The Following 13 Users Say Thank You to Keith Doty For Your Post:
That is beautiful. I have to laugh because it reminds me of the first Parker I had restocked It was a hammer 20 gauge and I told the stocker it was a low grade gun so nothing fancy. When he sent the gun back he said he had picked a scrap off the floor. Like yours it was outstanding and I called my father to tell him about it. I let the phone ring three time before I realized Papa had died about four months before.
The Following 10 Users Say Thank You to Harry Collins For Your Post:
Harry, that's gorgeous, doesn't look like scraps to me! Funny, those were my exact words to my guy, "It's a bottom grade gun, it wants a strait grain piece of ho-hum American walnut, just like it left Parker 90+ years ago. Let's try to match the original as close as you can." BUT, I'm not gonna complain!
I'm off to Briley's to pick up the barrels for my 30" FxF today. I've had guns and gun parts scattered all over the country for months and it's time for them to all "fly" home. Bird season is upon us again.
The Following User Says Thank You to Keith Doty For Your Post:
Brian, you are correct. My intentions were to reproduce as close as possible the original stock. V guns typically had pretty strait grain plain stocks. I own several examples, all with what I would call "basic" walnut stocks. This deal involved me trading a piece of custom equipment for the job ( I own Texas Hunting Systems). In my mind my guy's thinking was he wanted to exceed my expectations. He did although deviated from the path I had in mind. As I have no intentions of this gun being sold in my lifetime I'm going to enjoy it for many years, it's a very nice little 20 ga. to take afield. It has been re-case colored, re-rust blued, and so I would say the collector's value as an "all original" Parker was pretty well gone when I started on the stock project. I'm going to let my estate worry about that after I'm gone. My nieces and nephews will all get to choose one rifle and one shotgun on my passing, the rest to be sold as my widow sees fit. At that point I certainly won't care!
The Following 2 Users Say Thank You to Keith Doty For Your Post:
Brian, on the same subject, I'm the fellow that contacted you about the mesquite stock for the VHE 16 ga. Kinda the same story, at some point shortened and a pad added. I still want to have the well aged rather large log of old growth mesquite I have sawn hoping to get a good, usable blank set out of it. Then, If I can talk you into taking the job, having the VHE restocked to my liking. I have found a mill guy, just haven't had time to get with him.
The Following User Says Thank You to Keith Doty For Your Post:
Looking at your business https://texashuntingsys.com it is evolution from the plantation days of mule drawn wagons.
I appreciate your prospective on your 20 gauge. I too have a few that fall into that category. One is the VH 12 gauge that Sherman Bell blew the barrels off of. He found that fluid steel Parkers are just as stout as Damascus. So with no barrels and shattered stock I patiently waited. My cousin gave Uncle Bill's, her father, 20 VH, a 16 VH with single trigger and no stock, plus a set of #2 frame Damascus Barrels.Being partial to straight stocks and checkered butts both the 16 and 12 received scraps.
The Following 2 Users Say Thank You to Harry Collins For Your Post:
That's quite a scrap pile you stumbled on!
I've always wanted to take time, go to Georgia, and spend a few days doing the mule drawn hunt. My customers and myself are hunting ranches from a few hundred acres to many thousands. A good part is wicked brush, cactus, etc. EVERYTHING south of San Antonio will bite, stick you, or scratch you. We typically follow the dogs with vehicles of one kind or another, mules and wagons just not practical. Another issue is frequently even on into winter a working dog is smokin' hot, lathered up and has his nose dusted up where he can't smell s*#& if he steps in it. Dogs have to be rotated out, cooled down, etc. so lots of kennel space on our rigs can be a must. You kinda gotta be mad at the quail to hunt the brush country!
The Following User Says Thank You to Keith Doty For Your Post:
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."
George King, "That's Ruff", 2010 - a timeless classic.
The Following User Says Thank You to Dean Romig For Your Post:
Dean, the little girl with the long, floppy ears in my avatar laid her head in my lap this morning wanting to know why we weren't at the teal pond, she doesn't understand "working", "money", or any of that. She takes for granted a safe full of shotguns and an unlimited stock of shells. Come November 1 it's always a dilemma between the duck blind, the deer stand, or the quail pastures (and sometimes like today, slaving away at the business). What a great problem to have! Best of Fall to you, we gotta enjoy it while we can.
The Following 3 Users Say Thank You to Keith Doty For Your Post:
09-25-2020, 11:43 AM
Hybrid Mode