Newest Member

[Pa SxS]

James, your thinking too much

First of all, what's the serial number??? Second, Parker didn't make actions according to gauge, they made them to the frame size (distance between firing pin holes.) If your sure it's a #2 frame size, it could be anything from a 10,11,or 12 gauge in that time period.

Or are you saying the receiver's (you call it the action) serial number is different than the barrel and forend serial numbers???

[James Brigham]

Yes, I was, the receiver is a #2 frame serial number 6527. Research shows it was a 12 ga made in 1875 underlifter 30" barrels. The butt stock matches the receiver and trigger guard. The barrels and forend serial numbers are 6410 which according to records was a 10 ga 30". Sadly, the rib is shot and the barrels have been cut (rather hack job) to 26 3/4" So again my question is: is this a total mis-match or would (after restoration) one be able to fire this? I trying to weigh my options with this (restore, cannibalize for parts, wall hanger in my office, trading material, as my youngest son needs to be out fitted. His brother shoots an Ithaca Flues 20. I have a beautiful VH 16, but in too nice a condition for a 12 year old . Any info would be great.

[Pa SxS]

James, I hope you own your own business or work out of the office in your house. Not to many companies let you have a gun for a wallhanger these days.

Can you shoot your gun? Most critical is the condition of the barrels and how they fit to the receiver. Wall thickness and deep pits are the most important for the barrels. If they are ok and the barrels fit tight to the receiver, it's up to you and your gunsmith to figure out if it's ok to shoot. If it is, I'd only use low pressure loads. With that much of the barrels cut, they would be cyl/cyl and would be good for close shooting.

[James Brigham]

As a matter of fact, I do own my own business! You are correct Sir! On any given day, you can find my bird dogs, one curled under my desk, the other on the leather couch in the lobby area, woofing or wagging at who ever happens to cross the thresh hold. The entire office looks like an Upland Guide Service, with the sporting prints, grouse fans, bronze statues, lithographs, shadow boxes and other do-dads of this passion of ours. I would not dare to shoot this particular gun (yet) and that says a lot. I hunt with a 109 year old Wesley Richards. My 14 year old uses his 100 year old Flutes 20, and now as of today, my 12 year old with a 1917 Flues 16.

[Autumn Daze]

James, All my family is in Vermont. My nephew and his wife and kids are in Wilmington and my brother and his wife are in South Newfane.Your office decor may raise some eyebrows elsewhere but not in VT....