16g loads

eddie gray · 12-12-2009, 08:14 PM

brought some multi 16g hulls and sr-16 wads
thinking of loading 16.4 clays 7/8 .would this be a good load
also will i need a filler wad
thanks eddie

Dave Miles · 12-14-2009, 01:40 PM

Quote:

Originally Posted by eddie gray

brought some multi 16g hulls and sr-16 wads
thinking of loading 16.4 clays 7/8 .would this be a good load
also will i need a filler wad
thanks eddie

The Multi-hull is a Cheddite hull, if you mean SP-16 Rem. wad?
That is not the best wad for that hull, or a 7/8 oz. load. Yes, you will need filler.

eddie gray · 12-14-2009, 07:09 PM

sorry sg-16 wad from bp products

Dave Miles · 12-15-2009, 08:33 AM

Eddie,

Are you looking for a low pressure load?
Do you want your hulls to be 2-1/2" or the regular 2-3/4"?
Post your e-mail address along with your response, and I'll send you some data.
Regards, Dave

eddie gray · 12-15-2009, 08:38 AM

hi dave
2 3/4 loading for low pressure loads
e-mail is whitedogs@comcast.net
thanks eddie

Dave Miles · 12-15-2009, 11:37 AM

Eddie,

I sent you some load data.
Personally I load about everything in the 2-1/2" hull.
You may want to look into the new DR-16 wad for 7/8 oz in the 2-3/4" hull.
It's made by Downrange, and is designed for this purpose with the Cheddite hull.