|
800 Plus Quick change |
09-22-2023, 11:58 PM | #3 | ||||||
|
800 Plus Quick change
Hey John,
You didn’t mention if your 800 Plus has the quick change dies, do the dies on your machine look the same as mine in the picture? Stan |
||||||
09-23-2023, 09:24 AM | #4 | ||||||
|
Same machine. I think there is a primer jammed in the station behind the primer track. If it would be easier, call me at 248 705 0239
__________________
"Striving to become the man my dog thinks I am" |
||||||
09-23-2023, 10:25 AM | #5 | ||||||
|
You may have a partially déprimed hull with the primer hanging part way out.
|
||||||
09-23-2023, 11:41 AM | #6 | ||||||
|
I suspect that is the case, but I can't get the shell holder out of the tray because it is blocked in by the primer track
__________________
"Striving to become the man my dog thinks I am" |
||||||
09-23-2023, 02:00 PM | #7 | ||||||
|
|
||||||
The Following User Says Thank You to Mike Koneski For Your Post: |
09-23-2023, 03:28 PM | #8 | ||||||
|
Yep. Same setup as Stan's. Sure don't want to send it back to PW. Last time it was about $400 including shipping, and 2-3 months. Not sure I'd even be allowed to ship given that I can't remove all the shells.
__________________
"Striving to become the man my dog thinks I am" |
||||||
09-23-2023, 03:57 PM | #9 | ||||||
|
Wish I could help you more John,
Like you mentioned on the phone, hopefully a tech from Ponsness can give you guidance on how to unfamiliar that thing again, I’m sure they can. Mike, Those 16’s are what Shane is so good at emptying, I don’t even ask if I can shoot the 32” Ithaca 16 anymore, he more or less claimed it |
||||||
The Following User Says Thank You to Stan Hoover For Your Post: |
09-23-2023, 05:19 PM | #10 | ||||||
|
Try pulling the handle back as far as you can. It might lift the cross head enough to pull the shell holder out. You night also pry up the shell holder and you might be able to remove the die or rotate the dies. Billy
|
||||||
Thread Tools | |
Display Modes | |
|
|