|
 |
 |
|||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||
 |
 |
11-02-2013, 07:56 AM
|
#3 | ||||||
|
Steaming will only do so much. Shallow, light rings and light scratches will come up with enough steaming. If the fibers of the wood are broken at all, the damage will not come up by steaming.
If anything, steaming will at least minimize sanding work if you are going for a like new surface.
__________________
B. Dudley |
||||||
|
|
||||||
 |
 |
 |
| The Following 2 Users Say Thank You to Brian Dudley For Your Post: |
|
|
|
11-02-2013, 09:03 AM
|
#4 | ||||||
|
Mr. Dudley is correct. Gouged out wood or torn wood fibers will not react much, if at all to steaming.
And while this process is most effective when a stock's finish is removed to bare wood, I have found that it is sometimes possible to steam "through" some of the early, basic finishes... but not to huge effect. This sometimes works on small, shallow dents to remove or minimize them. However, I don't recommend that the inexperienced try it. Some, if not many, wounds should be left as part of the gun's character. |
||||||
|
|
|
||||||
|
|
|
| The Following 2 Users Say Thank You to John Campbell For Your Post: |
|
|
|
11-02-2013, 09:40 AM
|
#5 | ||||||
|
Robert - nice job on that stock, and the twist in the barrels looks just as nice. what is the gun?
As for steaming, i have done it to a few stocks, and as said above - it removes some small dents but they generally seem to be the least of the damage to old wood.
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE |
||||||
|
|
|
||||||
|
|
|
|
|
|
11-02-2013, 10:39 AM
|
#6 | ||||||
|
Rick, The "Plain Twist" barrels and stock are from a #3 frame,1887 10ga, top lever hammer gun. Unstruck weight of 6lbs, thinnest spot I can find in the tubes measures .o52, It's a nice heavy gun just shy of 10lbs.
Being in agreement with all the above advice, I would suggest anyone wanting to try steaming dents, should grab a piece of scrap wood, knock a few dents of varying size in it and have at it. Great way to learn.
__________________
 "Double guns are a sport and a pastime built into a beautiful package to which I attach myself when entering the great theater of autumn, those days now grow more precious because we are given so few".. Robin Lacy
|
||||||
|
|
|
||||||
|
|
|
| The Following 4 Users Say Thank You to Robert Rambler For Your Post: |
|
|
|
11-03-2013, 10:34 AM
|
#7 | ||||||
|
Beautiful stock refinish! Thanks to all that replied. The information is very useful. I will live with the scratch as is, and address it when and if I decide to refinish.
|
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Scott Smith For Your Post: |
|
|
|
11-04-2013, 12:29 PM
|
#8 | ||||||
|
Good course of action. I speak with a lot of people that want to put money into a gun that has one mark on it and it is a gun that they are going to keep using.
I tell them that ultimately, I will do for them whatever they want me to, but it may be a better idea to wait until it gets a few more marks before doing anything. Because the inevitable fact is that if something is used, it will get marks and such on it.
__________________
B. Dudley |
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Brian Dudley For Your Post: |
|
|
|
12-21-2013, 11:35 AM
|
#9 | ||||||
|
Why is it that marks from the rack or safe are so much worse than marks obtained in the field?
|
||||||
|
|
|
||||||
|
|
|
 |
|
|
Linear Mode
