|
08-06-2016, 11:01 AM | #3 | ||||||
|
Charlie I think you have it just right at 22 grs GD. plan to try that 19 Red Dot load too.
William |
||||||
08-08-2016, 06:06 PM | #4 | ||||||
|
22.5 grains is where I settled for 1 1/8 ounce in the Short Ten. Looking at the results of your test I will bet 22 grains of GD is right where you want to be a for a period correct loading, 1150 to 1175 fps.
__________________
Progress is the mortal enemy of the Outdoorsman. |
||||||
The Following User Says Thank You to Pete Lester For Your Post: |
08-09-2016, 07:09 AM | #5 | ||||||
|
Pete I think you are right. What's your charge when you load 1 1/4 oz, looking for the same velocity ?
William |
||||||
08-09-2016, 07:52 AM | #6 | |||||||
|
Quote:
PS. Pressure on the 29 grain load in the 3.5" hull was 8800 psi so 27 will be even lower, my guess probably around 8000 psi.
__________________
Progress is the mortal enemy of the Outdoorsman. |
|||||||
The Following User Says Thank You to Pete Lester For Your Post: |
08-18-2016, 02:25 PM | #7 | ||||||
|
I need to figure out how much Unique , Green Dot and Universal Clays to use in the 10 gauge with the SP-10 wad a 16 gauge 1/8" filler and 1 1/4 ounces of shot and keep the velocity around 1100 FPS . May also try for the same thing with Blue Dot and Herco .
|
||||||
|
|