|
05-31-2020, 11:52 AM | #3 | ||||||
|
I wouldn’t use wax on wood either. Especially wood with worn finish.
Others will disagree. It doesn’t matter. It is just my opinion.
__________________
B. Dudley |
||||||
The Following 2 Users Say Thank You to Brian Dudley For Your Post: |
05-31-2020, 05:20 PM | #4 | ||||||
|
A light rub of TimberLuxe occasionally.
Up until I found TimberLuxe I had always used Ballistol on the metal and on the wood. .
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
The Following User Says Thank You to Dean Romig For Your Post: |
05-31-2020, 05:24 PM | #5 | ||||||
|
There are three(3) products I have used for basic preservation and moisture restoration.
Old West Snake Oil is the one I like best! Next, Formby's Lemon Oil Treatment. Third, is Howard Feed-N-Wax Wood Preserver. They soak into the wood and leave a short term sheen. They don't turn wood "black" like gun oils. They are not wood finishes like linseed, tung oil, etc. Bob Jurewicz |
||||||
05-31-2020, 09:04 PM | #6 | ||||||
|
Thanks for all of the recommendations. I’m assuming there is no one answer here so I will do some additional research on the products you have recommended.
|
||||||
The Following 2 Users Say Thank You to Mike Breitenbach For Your Post: |
06-01-2020, 02:33 PM | #7 | ||||||
|
Results of nothing for 120 years.
|
||||||
|
|