Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums Parker Hammer Guns

Notices

Reply
Thread Tools Display Modes
Waste of time, or....?
Unread 03-23-2021, 10:41 PM   #1
Member
John Cleveland
PGCA Member

Member Info
 
Join Date: Mar 2021
Posts: 56
Thanks: 31
Thanked 88 Times in 21 Posts

Default Waste of time, or....?

I have a Parker lifter hammer that my father found in the attic of a house he bought, probably in the late 1940's or early 1950's. It was/is in terrible shape. In the late 50's, he had the firing pins cut off, the front section of the top rib, which had come loose, soldered back in place, put adhesive tape around the cracked stock near the block, and gave it to me to play with. For some reason, probably sentimental, I kept it around, though we thought that it probably was ready for the junk pile. As I matured and learned that it was a Parker and the value of them, I always felt sick that someone had so poorly treated the gun, but considering its condition, didn't spend any time thinking about it. Later, my sons played with it in learning about guns. Sometimes in the field or drinks after, I would lament its fate, but it was discussed like you would a dead relative--a sad loss, but over with.

Then, today, at a hunting preserve training my dog, sitting around afterwards, talk turned to the Parker that the trainer had, and the L.C. Smith another hunter had. As usual, I raised my lament. Surprisingly, the hunter stopped me and said that maybe I should check with Turnbull Restorations, that they can do amazing things. I thought that might be very unlikely, but I came home to look at their website. That got me thinking at least, maybe I can figure out the model and age of the gun, if nothing else for curiosity's sake. That led me to this site, and a lot of looking at resources here.

Turns out that SN 15313 was shown in your SN list as manufactured in 1879 (although there appears to be engraving on the forearm release that looks like "TD MAR 25, 1878" . It is apparently a model U with Damascus barrels and a straight English stock. Aside from the stock, it looks like the Grade 2 section link to pictures of lifter hammer guns, which shows a Grade U gun.

So, I am wondering about where a U model fits into the scheme of grades. I don't find it specifically listed on the grade description page, though it shows up in pictures linked from the Grade 2 section. Is there any thing distinguishing it from Grade 2, or other grades?

Finally, after dismissing the gun all these years, the idea of some kind of restoration is intriguing. I seriously doubt it could be restored to significant value, but an expert might be able to make it an attractive display for, say, over a mantle. Maybe after all it has been through, it deserves some love for being a survivor. Does anyone know anything about Turnbull Restoration?
John Cleveland is offline   Reply With Quote
Unread 03-24-2021, 10:33 AM   #2
Member
Hammer Gun
PGCA Lifetime
Member
 
Gary Carmichael Sr's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 3,656
Thanks: 2,800
Thanked 7,871 Times in 1,674 Posts

Default

Jon, Some photos of the old girl would help us with identifying what you have, should be a grade 2 under lifter straight stock with 30" Damascus barrels, Gary
Gary Carmichael Sr is offline   Reply With Quote
Unread 03-24-2021, 10:38 AM   #3
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 32,073
Thanks: 36,785
Thanked 34,219 Times in 12,647 Posts

Default

Doug Turnbull runs a great operation restoring these old guns. His shop turns out some really nice work. There are others however, who can produce equally nice work.

The checkering, especially on the forend - if it is still evident there, can give a clue to the grade of the gun, that and the engraving on the lock plates and elsewhere on the frame.

You should post some pictures here on this thread.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
Unread 03-24-2021, 11:35 AM   #4
Member
John Cleveland
PGCA Member

Member Info
 
Join Date: Mar 2021
Posts: 56
Thanks: 31
Thanked 88 Times in 21 Posts

Default

Thanks! I will post some shortly. I almost hesitate, because it may be as painful for others as it is for me to see its condition.
John Cleveland is offline   Reply With Quote
Unread 03-24-2021, 11:41 AM   #5
Member
John Cleveland
PGCA Member

Member Info
 
Join Date: Mar 2021
Posts: 56
Thanks: 31
Thanked 88 Times in 21 Posts

Default

BTW, after looking at some pictures here and restored guns on Turnbull, I think that the "TD MAR 25, 1878" is a patent date marking. I will show it in the pictures.

What resolution should I use? They will be iPhone 12 pictures which are quite detailed, but quite large.

Last edited by John Cleveland; 03-24-2021 at 11:42 AM.. Reason: punctuation-replaced period with question mark
John Cleveland is offline   Reply With Quote
Unread 03-24-2021, 01:24 PM   #6
Member
Andy
PGCA Member

Member Info
 
Join Date: Dec 2019
Posts: 1,944
Thanks: 263
Thanked 2,645 Times in 1,038 Posts

Default

Mid to low resolution is fine for the screen. I'm looking forward to photos. I've seen one or two Turnbull restorations up close and personal. Stunning. Sit down if you decide to get a quote : )
__________________
Nothing ruins your Friday like finding out it's only Tuesday
Andrew Sacco is offline   Reply With Quote
Unread 03-24-2021, 01:54 PM   #7
Member
John Cleveland
PGCA Member

Member Info
 
Join Date: Mar 2021
Posts: 56
Thanks: 31
Thanked 88 Times in 21 Posts

Default

Hope these are good enough:
Attached Images
File Type: jpeg Parker - 1.jpeg (254.2 KB, 41 views)
File Type: jpeg Parker - 1 (1).jpeg (234.7 KB, 31 views)
File Type: jpeg Parker - 1 (2).jpeg (289.0 KB, 33 views)
File Type: jpeg Parker - 1 (3).jpeg (279.1 KB, 30 views)
File Type: jpeg Parker - 1 (4).jpeg (323.4 KB, 18 views)
File Type: jpeg Parker - 1 (5).jpeg (285.8 KB, 27 views)
File Type: jpeg Parker - 1 (6).jpeg (288.4 KB, 20 views)
File Type: jpeg Parker - 1 (7).jpeg (149.3 KB, 25 views)
File Type: jpeg Parker - 1 (8).jpeg (212.6 KB, 16 views)
John Cleveland is offline   Reply With Quote
The Following 2 Users Say Thank You to John Cleveland For Your Post:
Unread 03-24-2021, 02:08 PM   #8
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 32,073
Thanks: 36,785
Thanked 34,219 Times in 12,647 Posts

Default

Wow - that one’s been rode hard!

Judging by the “knot” in the bow-tie checkering of the forend it is a grade-2 or G. That’s called the three-point checkering pattern. A grade-1 wouldn’t have the knot in the bow-tie.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
Unread 03-24-2021, 02:25 PM   #9
Member
John Cleveland
PGCA Member

Member Info
 
Join Date: Mar 2021
Posts: 56
Thanks: 31
Thanked 88 Times in 21 Posts

Default

Do you know how the U stamped on it figures into the grade?
John Cleveland is offline   Reply With Quote
Unread 03-24-2021, 02:42 PM   #10
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 32,073
Thanks: 36,785
Thanked 34,219 Times in 12,647 Posts

Default

I had given my opinion on the significance of the U several months ago but I was pooh-pooh’d so I’l let others express their opinions.

This picture describes what I had posted then but I didn’t provide a picture then to support my opinion. And here it is for those who may have doubted.



.
Attached Images
File Type: jpg 81954612-5165-4978-A09A-9CB7A5BFCB40.jpg (168.0 KB, 11 views)
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
The Following User Says Thank You to Dean Romig For Your Post:
Reply

Tags
damascus barrels, grade u?, lifter hammer, restoration


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:13 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.