2.5" 28 Gauge Cheddite Hull Load

[Dean Weber]

Looking for a tested load using 2.5" 28 gauge Cheddite hulls. I will use Cheddite primers. Hoping for something using 20/28 powder but have some other choices as well.

Appreciate any details.

[Billy Gross]

I am looking for similar data:
Does anyone have a recipe for: 28 Ga AA Hulls, Alliant 20/28 Powder, Claybuster wads, using Cheddite Primers? Thanx, Billy

[Terry Schneider]

You might ask Precision Reloading as they had a few loads for the 2-1/2" 28 in their Shotshell Reloading Manual. All the loads used Universal powder and Remington primers.
TerryS

[edgarspencer]

Dean, I am using 12.5grs 20/28 in both Cheddite, and Fiocchi 2.5" hulls.
Because of intermittent component shortages, I use Sporting 28-II wads with a standard, unmodified 3/4oz charge bar. The Mec bar drops 13-14 #8 pellets short of 3/4oz.

I have another 3/4oz bar that I reamed out, to get a full .750oz, and when I was out of the SG28-II wad, used the PT-2895 wad. That wad needs a full 3/4oz to get a good crimp.

I never bothered to send these out for testing because that's the charge that Daryl shoots and That's good enough for me.
It's pretty tame. Not Daryl, the 28ga load.

[Dean Weber]

Thank you Edgar!

I am experimenting a bit with both 5/8 and 3/4 oz loads. Right now, I am using Win 572 with the SG28 wads in a Cheddite hull/primer.

I appreciate your information for 20/28 powder as that is what I have most of.

Best!