![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
There is not. There is nothing on the opposite side
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
As you alluded to earlier any alterations in that area make a person suspect of a stock repair. Take the stock off and see what's inside the head. If there are
signs of a repair that is most likely the answer. I suppose the owner could have damaged/gouged the side panel and this was an attempt to hide that. If there are no signs of repairs anywhere just call it custom and charge a little extra when and if you sell it. ![]() |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
I am not curious enough to remove the stock. Externally, I cannot see any damage. My best guess is a name plate, but that is an odd place for one.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Mills Morrison For Your Post: |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
You would think that if the owner went to that much trouble installing a name plate they would have followed through with the name or initials.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
I have a gh with a wooden plug on one cheek panel. When I removed the stock it was of course cracked, and a large brass screw had been run into that panel. I left it since the plug was well done and repaired the stock internally. So maybe it is just hiding a wood screw.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to George Stanton For Your Post: |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
Could be, but wouldn't there be a screw or something on the opposite side of the stock?
The initials could have worn off some time ago Last edited by Mills Morrison; 09-10-2018 at 12:03 PM.. Reason: More info |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
Mills, remove the stock, it's probably a pin but you won't know until you can look at it.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#10 | ||||||
|
![]()
A screw wouldn't have to go all the way through. I'd bet that's what is in there.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Richard Flanders For Your Post: |
![]() |
|
|