|
03-16-2016, 09:01 AM | #3 | ||||||
|
A mec 600jr and for the 2 7/8 you don't need a short kit. If you find a good deal on a used one but it's not a 10ga, the kit to change it to 10ga will cost a bit over a $100 so keep that in mind. I like the fold crimp, but that's just me. When the ends of the shells get bad you can always cut them back and load 2 5/8. Then you'll have to make a 1/4" spacer to fit under the shell holder, or maybe go to a roll crimp [ they look better/cool ]. Many of my cut shells aren't completely square, or should I say there's a small wiggle or tit on it. They still star crimp just fine. BPI or https://www.precisionreloading.com/ has the stuff you need - I like precision reloading - they're generally cheaper, especially their roll crimpers [ which are also much, much better ]. I just pick a low pressure 12ga load for 1oz under 8000psi. A REM SP-10 plastic wad and a 3/8 20ga fiber wad inside the plastic wad before the shot loads great for me. I also use a 12ga drop tube so the small 20ga fiber wad doesn't get stuck it quite so easily. First I push down the 10ga plastic wad with moderate pressure then the 20ga fiber wad with very light pressure. It's a " feel" sort of thing you'll pick up on very quickly [ like when shot spills all over everything ]. Hope I've helped a little - let us know how it goes. Paul
__________________
Paul Harm |
||||||
03-16-2016, 06:14 PM | #4 | ||||||
|
give us a discription of your new short ten...pictures would be nice and learning about loading the short ten is simple...also read pete lesters short ten loads its on the forum here....charlie
|
||||||
New 10 ga owner |
03-16-2016, 10:07 PM | #5 | ||||||
|
New 10 ga owner
Good evening
Thank you to all great information I am sure I will have more questions as I go down this trail I would like to be able to post a picture of my new Parker 10 as well as some great pictures of our Chukars hunting trips with my great German Shorthair pointers and my Parker hunting guns but I have not figured out how to get the pictures from my phone on to the forum I will have to learn that as well I do have one question in regards to Peters thread I do not understand how to down load the PDF file I see nothing to click on to open the file a little help would be great thanks again for all you do Alton Anker |
||||||
03-16-2016, 10:29 PM | #6 | ||||||
|
Alton
Do you have a computer or just use the phone? You'll need a Adobe PDF viewer to view or print the spread sheet https://acrobat.adobe.com/us/en/prod...df-reader.html Photos can be loaded to a hosting site such as photobucket.com. Or loaded to an album here on the Parker board I put some instructions for albums here http://parkerguns.org/forums/showthread.php?t=18427
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE |
||||||
|
|