|
08-25-2009, 03:02 PM | #3 | ||||||
|
Bob is correct on his first suggestion but you need to find that tiny coil spring. Chances are it is still up in the hole if you don't have it in hand.
|
||||||
08-25-2009, 04:16 PM | #4 | ||||||
|
Dave, it is, as Bob and Dean said, the pin that goes up into the hole where it pushes the lever that you depress to let the top thumb lever spring over to center, as when storing the gun in the case. You can see in your picture the detent into which the big end fits on the cocking slide on the bottom plate. With the action upside down, look for the hole immediately below (if it were right-side-up) the small lever you depress to let the top thumb lever spring over. As said, the small spring (which may still be in the hole) fits over the small end, which goes into the hole. Call me if I can help more: 307-733-3626.
Joe |
||||||
08-25-2009, 05:34 PM | #5 | ||||||
|
Like this? Spring was still in the hole - whew!
Thanks guys! |
||||||
08-25-2009, 07:02 PM | #6 | ||||||
|
That's it!
Joe |
||||||
08-27-2009, 12:56 PM | #7 | ||||||
|
Learned something today.... what a great Forum.
__________________
Leave this campground a little better than you found it. |
||||||
|
|