|
04-05-2016, 06:44 PM | #3 | ||||||
|
Thanks C O B. Thanks For the info. I agree for commercial loads RST shells are sweet. I love them and for anyone that doesn't shoot much I highly recommend them. But if you are wanting to shoot several rounds a week it is a bit pricey. As for pollywad I don't know. Also holland and holland make a fine round sold at classic shooting I think it is.
|
||||||
04-05-2016, 06:55 PM | #4 | ||||||
|
the Pollywad Vintager is a 2 1/2 low pressure load -
i have had a few cases - used them for clays and hunting - no complaints they just seems to be harder to find, I can get the RST at any SxS shoot
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE |
||||||
04-05-2016, 08:29 PM | #5 | ||||||
|
Hodgdon site has some 2 1/2" 12ga loads listed this is the lowest pressure of all of them Remington hull cut to 2 1/2' Win. 209 WAA12R Universal 20.8 1oz lead 7,300 PSI 1,180 , if that helps .
http://www.hodgdonreloading.com/data/shotgun |
||||||
04-05-2016, 08:53 PM | #6 | ||||||
|
Thanks Mark for the info. It will help someone I'm sure. I certainly hope this thread doesn't take away from any of the commercial companies that load these old loads. I have only bought from classic and rst. Both have great loads and I have nothing but respect for the people I dealt with and I enjoy them very much. I started this thread because after searching the various threads reloaders a were guesstimating their loads it seems. I prefer to know exactly what the load is. Things that go bang can hurt if misused even if by accident since this form is for reloaders I thought since they reload their shells anyway why not share. Thanks Mark
|
||||||
04-06-2016, 09:08 AM | #7 | ||||||
|
Does anyone know what "RST" stands for? Really Special Things?
__________________
"Striving to become the man my dog thinks I am" |
||||||
04-06-2016, 11:05 AM | #8 | ||||||
|
i asked that a while ago - even asked them at a shoot- no one seems to know
(Morris got the name when he bought the company) my vote was "retro shotgun technology"
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE |
||||||
04-06-2016, 03:53 PM | #9 | ||||||
|
Kirk, I realize you want documented loads; but any load for 2 3/4 will work in a 2 1/2" shell. If you roll crimp instead of fold crimp nothing in the way of components would have to be changed seeing how a roll crimp uses less of the shell. And a roll crimp would give you less pressure. As a side note; I've called Claybuster wads and explained I was loading low pressure shells [ 7500psi or less ] and ask if I could substitute one of their wads that had a shorter cushion height for the short shell. A CB1118 is for 1 1/8oz in a 2 3/4" Rem hull. I shorten the hull to 2 1/2 and use 7/8oz of shot using a 7/8oz shot data for a 7/8oz CB wad. He said if it were him, he'd have no worries - the pressure wouldn't hardly change. You also can go to fiber wads to get the shorter combination to fit and pressures will go down from the plastic wad. And if you're really worried about not having tested shells, send some to Precision Reloading or Tom Amhurst and have them checked. There are a number of ways to reload and not worry about having to high of pressures. JMHO
__________________
Paul Harm |
||||||
The Following User Says Thank You to Paul Harm For Your Post: |
04-07-2016, 10:26 AM | #10 | ||||||
|
Thanks Paul for the input. I really didn't start this thread for me as I have the 2 loads listed at the top of the thread. But I started this thread for those who in the future will be looking for these vintage loads. I spoke with IMR and Alliant Powders and both told me not to change anything on their loads ( By the way it looks like Alliant put up a new listing of their loads) or it would be done at my own risk. I understand everyone on here has a greater knowledge of reloading than me. But now that I have 2 set loads I can branch out from there like probably most with years of experience did in the beginning. Anyway I have a lot of goods things in the mail from Precision Reloading and as soon as I get back from Cabo I can begin " Getting off into it ". I plan on trying the loads at the beginning of this thread and making one with fiber wad and sending to the guys at Precision for testing. Also a 3/4 oz load. But right now I am headed to the Sea Of Cortez for some fishing and R&R.
gentlemen I will see you in the field. |
||||||
The Following User Says Thank You to Kirk Mckinney For Your Post: |
|
|