Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Announcement, Help & Introduction Forums Website & Forum - Help & Assistance

Notices

Reply
Thread Tools Display Modes
Short Barrel Parker 12 GA, GH model
Unread 03-24-2018, 07:50 PM   #1
Member
Jason Buchanan
Forum Associate

Member Info
 
Join Date: Mar 2018
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts

Default Short Barrel Parker 12 GA, GH model

I know this is a short barrel Parker but the barrel is right under 23”, is the correct length, I’m praying this is the factory length. It says special steel on the top and has injectors. Any guidance would be greatly appreciated, I bought several at a auction. Thanks!
Jason Buchanan is offline   Reply With Quote
Unread 03-24-2018, 08:18 PM   #2
Member
OH Osthaus
PGCA Lifetime
Member
 
Rick Losey's Avatar

Member Info
 
Join Date: Jul 2010
Posts: 7,884
Thanks: 1,720
Thanked 8,380 Times in 3,310 Posts

Default

23" - i doubt it- but give us the serial number and we can see if it is in the book

Ejectors throw the empties out - Injectors give gas to an engine - or seasoning to a turkey
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE
Rick Losey is offline   Reply With Quote
The Following 4 Users Say Thank You to Rick Losey For Your Post:
Unread 03-24-2018, 08:32 PM   #3
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 32,046
Thanks: 36,720
Thanked 34,161 Times in 12,637 Posts

Default

A word of advice, something a lot of us learned the hard way (and it appears you may be learning the hard way too) is to educate yourself about Parkers in general, but more specifically about a Parker you're about to bid on. Don't buy a gun just because it's a Parker. There may be something (or several things) like cut barrels that simply destroy the value of a Parker... or any gun. In situations like this you may never get your investment back.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
The Following 5 Users Say Thank You to Dean Romig For Your Post:
Unread 03-25-2018, 08:11 PM   #4
Member
B. Dudley
PGCA Lifetime
Member
 
Brian Dudley's Avatar

Member Info
 
Join Date: Aug 2011
Posts: 10,771
Thanks: 502
Thanked 18,595 Times in 4,767 Posts

Default

It sucks that someone cut down a Fluid steel GH. If it is cut. Chances are it is.
__________________
B. Dudley
Brian Dudley is offline   Reply With Quote
The Following User Says Thank You to Brian Dudley For Your Post:
Visit Brian Dudley's homepage!
Unread 03-26-2018, 05:48 PM   #5
Member
Bill Murphy
PGCA Lifetime
Member Since
Second Grade

Member Info
 
Join Date: Jun 2009
Posts: 15,950
Thanks: 6,387
Thanked 9,263 Times in 4,937 Posts

Default

Start us out with a serial number, then try to post some pictures.
Bill Murphy is offline   Reply With Quote
Unread 03-26-2018, 07:09 PM   #6
Member
James L. Martin
PGCA Member
 
James L. Martin's Avatar

Member Info
 
Join Date: Mar 2010
Posts: 762
Thanks: 1,007
Thanked 1,812 Times in 425 Posts

Default

Looked in Parker Story, no 23 inch GH listed with steel barrels. A quick look only found 3 VH with 23 inch, 2 in 12ga and 1 in 20ga.Also 1 PH in 16ga twist. So it does not look good, most likely cut. Please post serial number and photo.
__________________
" May you build a ladder to the stars climb on every rung and may you stay forever young "
Bob Dylan
James L. Martin is offline   Reply With Quote
Unread 03-26-2018, 08:41 PM   #7
Member
Jim DiSpagno
Forum Associate

Member Info
 
Join Date: Jul 2009
Posts: 1,861
Thanks: 5
Thanked 2,641 Times in 788 Posts

Default

Never say never when it comes to Parkers. The book has a lot of holes in it as does TPS since they were derived from the same info. I found a 24” 12 ga a couple of thousand numbers earlier than previously thought and a research letter confirmed it It was not in theserialization book or TPS
Jim DiSpagno is offline   Reply With Quote
The Following User Says Thank You to Jim DiSpagno For Your Post:
Unread 03-30-2018, 05:40 PM   #8
Member
Mike of the Mountain
PGCA Lifetime
Member

Member Info
 
Join Date: Feb 2014
Posts: 5,153
Thanks: 16,659
Thanked 9,908 Times in 2,949 Posts

Default

Sounds like a special purpose urban tactical Parker. Perfect for clearing a room of insurgents.
Mike Koneski is offline   Reply With Quote
The Following User Says Thank You to Mike Koneski For Your Post:
Visit Mike Koneski's homepage!
Unread 03-31-2018, 12:55 AM   #9
Member
Brush Buster
PGCA Member
Second Badge
 
Russ Jackson's Avatar

Member Info
 
Join Date: May 2009
Posts: 3,240
Thanks: 3,319
Thanked 3,656 Times in 1,121 Posts

Default

I own a PH Grade 16 Gauge on an O Frame with 22" Barrels a Fellow PGCA Member and Friend put me onto the gun a couple of years ago ,it isn't listed in The Parker Story but Letters exact through the PGCA Letter ! There is one PH Grade 16 Gauge listed in the Parker Story as having 23" Barrels ,I have often wondered if this is the gun listed but there was a mistake made when reading the information for TPS. I would suggest buying a letter ,as said Never say Never !
Russ Jackson is offline   Reply With Quote
Unread 05-16-2018, 10:53 AM   #10
Member
Mike Franzen
PGCA Lifetime
Member
 
Mike Franzen's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 2,934
Thanks: 1,323
Thanked 4,560 Times in 1,371 Posts

Default

Quote:
Originally Posted by Jim DiSpagno View Post
Never say never when it comes to Parkers. The book has a lot of holes in it as does TPS since they were derived from the same info. I found a 24” 12 ga a couple of thousand numbers earlier than previously thought and a research letter confirmed it It was not in theserialization book or TPS
And I have taken a lot of birds with it. Thank you.
Mike Franzen is offline   Reply With Quote
Visit Mike Franzen's homepage!
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:33 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.