|
09-16-2023, 09:29 PM | #3 | ||||||
|
I should think it’ll work fine on the trimmed Cheddercheese 10’s as they’re not very thick at all . I’d be intrested to see how it worked on the trimmed REM 10’s as they’re a bit thicker . As to the 8’s I don’t trim them so with the nice new WIN’s I’d like to think it’ll help . But I could very well be wrong
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
09-17-2023, 02:28 PM | #4 | ||||||
|
If you want or need deeper folds lower the crimp starter by putting a washer between it and the frame.
__________________
Progress is the mortal enemy of the Outdoorsman. |
||||||
The Following User Says Thank You to Pete Lester For Your Post: |
09-17-2023, 04:07 PM | #5 | ||||||
|
I’ve found not skiving the Remington 10s makes them last longer.
|
||||||
09-17-2023, 08:13 PM | #6 | ||||||
|
I’ve never done that in what would be called the correct way . The few times I tried I kinda debuted them so to speak with a pocket knife . Since I acquired a Robert’s Industries case trimmer and don’t use the band saw they’re not frayed/rough so I’m good .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
09-28-2023, 12:02 PM | #7 | ||||||
|
Another waste of money. I've trimed many different 12 and 10ga hulls and have never had a problem using the crimp starter that comes on a Mec. And I don't skive hulls.
__________________
Paul Harm |
||||||
Thread Tools | |
Display Modes | |
|
|