|
06-16-2015, 12:09 PM | #3 | ||||||
|
I used an acetone bath on a LC Smith I once had. Took an incredible amount of oil out of the stock. I repeatedly took it out of the bath, wiped it clean and then immersed it again. Maybe a half dozen times. No further oil leeched out after refinishing. Yrs ago, I used a heat lamp on an old stock that was pretty well soaked w/oil. Oil came to the surface but it's an incredibly slow process. Acetone bath I found was/is much faster and no harm to the wood that I could discern.
|
||||||
06-16-2015, 02:48 PM | #4 | ||||||
|
Acetone worked great for me. I soaked it for about 2.5 weeks. Changed it out once when the Acetone got to discolored. After that soaked it for a couple days in alcohol to clean it up. Then let it dry for about a week or so. Haven't had any oil come back up.
Heat works, but it takes a while and is slow. Some people put it in an oven and heat it, but I was too nervous about scorching the wood or drying it out too much. Others suggest using oven cleaner or covering it with the stuff you use to clean up oil spills in your garage. I have never tried any of those though. There is a post on here about someone having to get it chemically extracted because it turned out the oil in his stock was whale oil. But that doesn't appear to be a common issue.
__________________
"The Parker gun was the first and the greatest ever." Theophilus Nash Buckingham |
||||||
06-16-2015, 10:33 PM | #5 | ||||||
|
Just a question for every one, how many store their guns with the barrels down, Gary
|
||||||
06-16-2015, 10:56 PM | #6 | ||||||
|
It isn't that big of an issue as long as you don't leave it slathered in oil.
__________________
"The Parker gun was the first and the greatest ever." Theophilus Nash Buckingham |
||||||
06-16-2015, 10:59 PM | #7 | ||||||
|
I agree! Gary
|
||||||
06-17-2015, 01:52 PM | #8 | ||||||
|
Acetone works for the outer oil. And as you've been told, the stuff inside is still inside. It took 100 years to soak in there. And it isn't going to come out in a week. But in the meantime, the outside looks pretty decent. Probably last as long as you do.
|
||||||
06-17-2015, 07:48 PM | #9 | ||||||
|
I have used acetone and heat with very goo results.
First I get out what I can with the acetone and then fire up the hair dryer. Just blowing hot air on it from the hair dryer you can watch the oil leach out of the wood. Then repeat acetone and dryer as many times until satisfied. Works for me, Tom |
||||||
06-18-2015, 11:02 AM | #10 | ||||||
|
Thanks for the replies. Yes, I store my guns muzzle down.
__________________
Paul Harm |
||||||
|
|