Visit Brian Dudley's homepage! | |
12-15-2019, 03:19 PM | #3 | ||||||
|
For you that don't live close by, Brian has a massive collection of new and used Parker parts and he doesn't insist on installing the part he sells you, many do.
|
||||||
The Following 3 Users Say Thank You to Craig Budgeon For Your Post: |
09-19-2021, 01:56 PM | #4 | ||||||
|
B. Dudley, How would I go about getting parts from you? I have a 20ga VH 0 frame and the left barrel ejector wont push the shell out. I believe it to be a weak spring. It will trip and reset.
I believe someone added the ejectors, I cannot fine a E on the water table. Thanks |
||||||
09-20-2021, 12:44 AM | #5 | ||||||
|
Paul, there is no "E" on the water table. If the gun has ejectors, it's implied as VHE.
Will your ejector trip and reach its full extension on an empty chamber? If yes, then check that your chamber is clean and smooth. If that doesn't help then you may well need parts. |
||||||
09-20-2021, 08:45 AM | #6 | ||||||
|
Paul,
I would not advise one working on his own Parker ejector system unless they had considerable prior experience. Send the gun to Brian for repair. Bob Jurewicz |
||||||
The Following 2 Users Say Thank You to Bob Jurewicz For Your Post: |
09-20-2021, 11:13 PM | #7 | ||||||
|
Bob, I am just looking at options right now. When upland season is over "mid January" I plan on sending the old girl off for a major cleaning and fix what might need fixing. Not sure if a full restoration is on the menu, but I want to make sure it is good to hunt with for a lot of years to come.
|
||||||
09-20-2021, 11:27 PM | #8 | ||||||
|
David, Thank you for the clarification on the E. To answer your question, yes it works fine on an empty chamber, and both are smooth and burr free. Only thing I can come up with is a week spring.
|
||||||
|
|