![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
Sorry, it is the flat spring (1896 manufacture).
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
Search previous post as we have gone over this before. I would do it but have to run...
Harry |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
I looked back to 12/08 and didn't find the information on the forum, I don't know how to search the forum, other than just looking, but even that information would help.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
Did you click on the "Search" tab at the top of the page and type in a keyword?
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Dean Romig For Your Post: |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
Thanks Dean, I'm getting a little slow in my old age, and although I looked for it, I didn't see the tab. I have found it now (thanks to you). I will go try it out.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
I found Harry's post from November. They will be very helpful in this operation.
Thanks to all! |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
i also just ordered a top lever spring from dixies, and reshaped it and installed it myself. so i know what to expect. i used a mini ruler to measure the inside of the spring positions, and compared it to the original, the problem i had was the broken part of the original was lost.
i posted pictures on my thread *to restore or not to restore* im happy to say my rifle works like a charm |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to krishamilton For Your Post: |
![]() |
![]() |
![]() |
#10 | ||||||
|
![]()
Thanks Kris, I don't have an old spring to work from, it is totally missing. I will just try measuring it with the the engineer's scale on my calipers, and work it down slowly. I will also go check out your thread.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Tags |
fitting, installation, spring, toplever |
|
|