|
11-28-2022, 01:29 PM | #3 | ||||||
|
Are you sure you need 2 3/4" shells most Parkers in 10ga were chambered for 2 7/8". RST doesn't list 10ga shells on their web site and Morris Baker had no idea about availability at the Vintage Cup. I think the only alternative is to reload.
|
||||||
The Following User Says Thank You to Craig Larter For Your Post: |
11-28-2022, 02:41 PM | #4 | ||||||
|
When we were at Rock Mountain end of July he told me 10 gauge components were not even on the horizon for him to get back in production .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
11-28-2022, 02:58 PM | #5 | ||||||
|
Alan, the problem you will most likely run into if you can find 2 3/4" 10g shells is they are probably loaded for heavy game loads. Those are tough on our 100+ year old stocks.
|
||||||
11-28-2022, 04:01 PM | #6 | ||||||
|
Currently all the components you'd need to reload for the 10 gauge 2 7/8" are in stock.
|
||||||
11-28-2022, 06:11 PM | #7 | ||||||
|
Make your life easier and get some 10- to 12-gauge Gauge-Mates and use 12-gauge shells.
|
||||||
The Following 3 Users Say Thank You to Dave Noreen For Your Post: |
11-28-2022, 06:17 PM | #8 | ||||||
|
Blasphemy blasphemy ! Shot 8’s in 8’s and 10’s in 10’s
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
The Following 4 Users Say Thank You to CraigThompson For Your Post: |
11-28-2022, 06:49 PM | #9 | ||||||
|
|
||||||
The Following 3 Users Say Thank You to Craig Larter For Your Post: |
11-28-2022, 11:05 PM | #10 | ||||||
|
I beg to differ . Checked both BPI and Precision neither had Remington or the Gualandi style wads . Plenty stuff for steel which I’m not using or you could do it with all fiber wads , don’t plan on going that route either .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
|
|