|
 |
 |
|||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||
 |
 |
05-05-2024, 12:07 PM
|
#3 | ||||||
|
At that date Phil I'm going to guess 2 5/8 but it could be 2 1/2. You would need to measure it to be sure. But if this helps I've shot nothing but 2 3/4" out of all my Parkers, Foxes, Lefevers and even my Wm Ford damascus 20 with no problem. Of course I handload and keep the pressures and payloads down to sensible levels.
__________________
Wag more- Bark less. |
||||||
|
|
||||||
 |
 |
 |
| The Following 5 Users Say Thank You to Daryl Corona For Your Post: |
|
|
|
05-05-2024, 12:47 PM
|
#4 | ||||||
|
Thank Dary. I don't have the gun, and my question is self-serving. On another site a guy asked if he could shoot 1-1/8oz Remington Express loads at turkeys out of his 1935 Trojan; he says a 2-3/4" shell drops right in but didn't say if he'd measured the chambers. I said I've shot many boxes of 2-3/4" shells through my 1926 16ga Trojan, both 1oz and some 1-1/8oz. I do try to stay under 1200fps. Those Remy Express loads list at 1295, a little stiffer than I'd prefer, but I said I doubted shooting a few would hurt anything. I was definitely a minority of one, and was chastised for using anything but 2-1/2" shells
 !
__________________
It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so. - Mark Twain. |
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Phil Yearout For Your Post: |
|
|
|
05-05-2024, 01:15 PM
|
#5 | ||||||
|
I had a 1935 16ga Trojan and it had 2 5/8 " chambers for 2 3/4" shells.
__________________
" May you build a ladder to the stars climb on every rung and may you stay forever young " Bob Dylan |
||||||
|
|
|
||||||
|
|
|
| The Following 3 Users Say Thank You to James L. Martin For Your Post: |
|
|
|
05-05-2024, 02:00 PM
|
#6 | |||||||
|
Quote:
and your done with it. Harry |
|||||||
|
|
|
|||||||
|
|
|
| The Following User Says Thank You to Harry Gietler For Your Post: |
|
|
|
05-05-2024, 02:18 PM
|
#7 | ||||||
|
A blade gauge goes into my 1926 to 2-3/4". Have no idea if they have been lengthened.
__________________
It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so. - Mark Twain. |
||||||
|
|
|
||||||
|
|
|
|
|
|
05-05-2024, 08:17 PM
|
#8 | ||||||
|
I saw the post you're referring to, and I agree with you, I'd shoot the heavier loads thru it on occasion with out worry--like for turkeys.
__________________
"How kind it is that most of us will never know when we have fired our last shot"--Nash Buckingham |
||||||
|
|
|
||||||
|
|
|
| The Following 2 Users Say Thank You to Harold Lee Pickens For Your Post: |
|
|
|
05-05-2024, 10:08 PM
|
#9 | ||||||
|
This from a 1936 Trojan 16.
|
||||||
|
|
|
||||||
|
|
|
| The Following 7 Users Say Thank You to Randy G Roberts For Your Post: |
|
|
|
05-05-2024, 11:45 PM
|
#10 | ||||||
|
The Remington era Parker specification sheets reproduced in The Parker Story show a 2 5/8-inch chamber for 2 3/4-inch shells.
Remington Specification Sheet GHE, 16-gauge highlighted.jpg I would think that under Remington ownership they would have gone to chambering the 16-gauge for 2 3/4-inch shells pretty quickly as Remington was the main mover and shaker for the 2 3/4-inch 16-gauge shell when they introduced their Model 11 and The Sportsman autoloaders in 16-gauge in 1931 made for 2 3/4-inch shells. AUTO EXPRESS New Goods Kleanbore catalog.jpeg AUTO EXPRESS, #6 Chilled.jpg When Remington introduced their Model 31 pump in 16-gauge in 1933 it was also made for 2 3/4-inch shells. |
||||||
|
|
||||||
|
|
|
| The Following 3 Users Say Thank You to Dave Noreen For Your Post: |
 |
|
|
Linear Mode
