![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
So I am understanding this properly the sleve makes the only difference. And what website, or you refering to a thread on this forum. Thanks for the help.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
I don't know what other changes are made, but you do need to shorten your shell sizer or buy one. The website I refer to is the PW website. I went on the website and find that they don't make the 375 any more and don't give a lot of information on the tooling. Call their 800 number and talk to them. They know everything on the phone.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
Thanks for your help.I will give them a call.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
To load 2 1/2" shells on a P-W 375 loader set up for 2 3/4" shells is that the sizing die needs to be shortened to accommodate the shorter shell (or you can order one directly from P-W for $35) and the pre-crimp needs to be lowered.
__________________
Wild Skies Since 1951 |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
Thank you. I had already called PW and that is exactly what they told me.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|