|
10-19-2012, 06:11 PM | #3 | ||||||
|
I'am sorry . the press is a 375c. I don,t own a camera and I would not no how to post a picture if I had one. I am somewhat computor eliterate.
|
||||||
10-19-2012, 06:30 PM | #4 | ||||||
|
Sorry, I'm not familiar with that model press. Hopefully Murphy will chime in.
Please, if your not familiar with shotgun reloading, get help from a friend before you start loading. Get reloading data from powder manufacturers and follow them. Most important, get a scale to weigh your powder and shot drops. If you don't have a manual with the press, Ponsness Warren may have a manual on their web site or can send you one. Good Luck! |
||||||
10-19-2012, 08:52 PM | #5 | ||||||
|
I don't know of any plastic part for a PW 375, except the wad guide. You have a great loader.
|
||||||
10-19-2012, 10:11 PM | #6 | ||||||
|
I did recieve a Guide with the press and I did not find anything about this piece in it. I checked with the people I got thiss press from and they did,nt no what it was for ether. Buy the way I have done a lot of realoading But no shot shells in about 30 years. Should be interesting. Going to try some of the light 3/4 oz loads that I have seen on this forum.
|
||||||
|
|