|
01-18-2010, 12:37 PM | #3 | ||||||
|
Brian;
Oh my God and werse yet it happened to my dream gun. I am sure it can be put back close to original via modern epoxys and skill. Again oh my God I need a Famous Grouse after this; Roger |
||||||
01-18-2010, 01:54 PM | #4 | ||||||
|
Recommend Stock Doc in Oregon, but he is a year out.
Trevallion isn't taking any more new customer repair jobs for the time being. I suspect the stock was already cracked to break from just a drop. They use a dilute SuperGlue, isocyanide. Its possible to fix yourself if you have all the pieces. Jim Williams here on site may be able to help. You might check for oil saturation as a cause of weakness. |
||||||
01-18-2010, 02:05 PM | #5 | ||||||
|
Well here ya go.... pics of the carnage. It makes my stomach turn just to look at it.
Bruce, there were NO cracks...not a hairline...nothing. If you look at the second pic you can see it cracked along the grain and right thru the trigger screw hole. |
||||||
01-18-2010, 02:21 PM | #6 | ||||||
|
I think it needs to be pinned and glued and Dennis whats his name can do that so well that you won't be able to tell. The wood looks solid.
Cracks are usually through the cheeks or back from the top tang. You often see this type of break from a fall where a person lands on the gun or tries to break his fall with the stock. This one it seems fell just right ( wrong). Lord knows I've stepped in enough badger and woodchuck holes while walking through high CRP that it could have happened. |
||||||
01-18-2010, 02:28 PM | #7 | ||||||
|
It was like an out of body experience...I dropped it maybe 3 feet down to the ground while fussing with a flopping rooster. I didn't think anything of it so I kept putting that bird in my bag then turned around and it was like one of my kids just got run over by a car!!
I'll give Dennis a call and see what his thoughts are, thanks Dean and Bruce. Oh and Rodger, I didn't have any Famous Grouse with me but washed down quite a bit of Makers Mark while walking around working my dog for two buddies carrying my Parker Brothers Fire Wood thru the field. |
||||||
01-18-2010, 02:37 PM | #8 | ||||||
|
Of course, that grain across the wrist doesn't help at all in the strength department. Highly figured wood like yours is a very good example of why Parker Bros installed the hickory reinforcing rod from the butt right up through the wrist of the stock.
|
||||||
01-18-2010, 02:43 PM | #9 | ||||||
|
Brian,I feel your pain... Hope this helps...thestockdr@riflemag.com 1-541-483-2182
Whats his name is Dennis Smith He does great work!
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker Last edited by Dave Suponski; 01-18-2010 at 02:54 PM.. |
||||||
The Following User Says Thank You to Dave Suponski For Your Post: |
01-18-2010, 02:44 PM | #10 | ||||||
|
I have a guy here in Michigan that could probably fix that. A number of members on the BBS have used him and all have been pleased
|
||||||
|
|