|
06-27-2023, 11:12 AM | #3 | ||||||
|
Thanks Dean. To clarify, The gun "falls" open a little too easy, like the ejector springs are pushing it open perhaps.
|
||||||
06-27-2023, 11:34 AM | #4 | ||||||
|
Ejectors being in time means that they trip at the proper point in opening the action, and at the same time together.
__________________
B. Dudley |
||||||
The Following 10 Users Say Thank You to Brian Dudley For Your Post: |
07-02-2023, 08:58 AM | #5 | ||||||
|
The springs are cocked, so the the actual mechanism shouldn’t be moving the ejectors when opening the gun unfired, there shouldn’t be any excessive resistance in either direction for an unfired gun, unless the gun is an assisted self opener/self opener, but that wouldn’t be a Parker.
|
||||||
The Following 2 Users Say Thank You to Rick Riddell For Your Post: |
07-02-2023, 10:29 AM | #6 | ||||||
|
Not the case Rick. In a lot of cases the ends of the ejector kickers or cocking toggle do contact the hammers and push them back just a little bit when closing the gun. This can give the feeling of a little bit of spring when opening the gun or when removing the forend from the gun.
__________________
B. Dudley |
||||||
The Following 2 Users Say Thank You to Brian Dudley For Your Post: |
07-02-2023, 10:45 AM | #7 | ||||||
|
Interesting are you describing initial resistance on opening or opening and that last bit there’s some kick back from applying pressure on the kickers and springs, almost suggests there’s some wear in the fit. In any case it’s an interesting question.
|
||||||
07-02-2023, 05:04 PM | #8 | ||||||
|
Brian
Thats it, bingo Thanks. The kicker split shaft is just a hair long, so it does get compressed when you close the gun and thus uncompresses when you open it. |
||||||
|
|