Visit Drew Hause's homepage! | |
05-17-2012, 08:11 PM | #3 | ||||||
|
Please do post us a photo when you get it cleaned up. I love the look of a nice damascus blade.
__________________
-- -JimC |
||||||
05-17-2012, 09:18 PM | #4 | ||||||
|
Have been trying Drew's trick - so far, no progress. Someone suggested using coffee pot cleaner, which is apparently a mild etching solution. Anyone ever heard of that?
|
||||||
05-18-2012, 09:10 AM | #5 | |||||||
|
Quote:
I think simonize makes a light duty one that could work well for you
__________________
-- -JimC |
|||||||
06-16-2012, 02:45 PM | #6 | ||||||
|
John, I make damascus knives. If it were me, I'd take some 220 grit wet dry paper, dip it in water and clean it up. Then dip it in feric chloride [ from Radio Shack ]. Cut it about 50/50 with water. Hold it in for a minute, pull it out and check it. It may take a dip or two. When satisfided use some baking soda/water paste to neutralize the acid etch. Some will then use a blueing - it's something you'll have to play with. The whole blade may get blued and if you don't like it try hitting the high spots with maybe some 400 or 600 grit dry. You'll need a backer so it doesn't go down in the low spots. If you mess it up, start over. Or you can do without the blue if you like it. Hope this helps - Paul
__________________
Paul Harm |
||||||
06-16-2012, 03:20 PM | #7 | ||||||
|
Paul - Thanks. Will head to Radio Shack.
BTW, was somewhere near your neighborhood yesterday, shooting at a charity sporting clays shoot to benefit the MUCC program to encourage young shooters. We shot at Grand Blanc Huntsman's Club. They had it set up as a cupcake course (Any time I can shoot 45/50, you know it's an easy one) 50/50 was high gun. Our team average of 87% was only good enough for about 4th place. Nice club. They are hosting the state Sporting Clays Shoot there next weekend |
||||||
06-20-2012, 01:14 PM | #8 | ||||||
|
I've shot there when it was easy and hard. Nice club. Paul
__________________
Paul Harm |
||||||
09-29-2012, 08:37 PM | #9 | ||||||
|
The thing that tickles my fancy about knives is not what the blade looks like but how it holds an edge. I've got about fifty knives of all kinds and enjoy sitting in front of the TV sharpening them. Knives are very different when it comes to sharpening and holding an edge. By far, btw: my sharpest knives are old Cub and Boy Scout folders. Camulus blades. An old K-Bar is good and made by the same company. Other old folders are capable of taking and holding a good edge. Swiss Army knives, both companies, take an edge and then lose it. I carry one tho, and freshen the edge daily. A few strokes on a steel does the trick. Case knives are okay, but I can't get a good edge on the small ones.
IMHO, if one wants to carry a sharp blade for little money, then go to a gun show and buy an old, cheap pocket knife that has a dirty, stained, made in the US, steel blade. Forget stainless. You'll be able to get an edge on it that you can shave with. I have not been able to get a razor sharp edge on a damascus blade, but I only have two and one is a cheap kit blade. The other is a hand made blade. It is small and takes a pretty good edge. It is a totally hand made knife. |
||||||
09-29-2012, 10:01 PM | #10 | ||||||
|
Steve;
What method do you use to sharpen your blades? |
||||||
|
|