|
08-30-2024, 01:14 PM | #3 | ||||||
|
0 Grade 12 gauge w/fishtail Top Lever. Probably 30" barrels. 3lbs 13oz is the unstruck barrel weight, gun probably weighs around 7lbs 7oz. Twist is the composite barrel type, not Damascus, 2 different manufacturing processes. Looks to be in very good to excellent condition. Please show us pics of the stock, foreend, and butt plates. Congrats!!!
__________________
If it were easy, everyone would do it. |
||||||
08-30-2024, 01:16 PM | #4 | ||||||
|
The T with the quarter moon marks above and below are the barrel material mark for Twist. Twist barrels were used on the entry-level, Grade 0, hammer guns. Grade 0 guns were cataloged in four qualities -- Quality R was a 10-gauge with a pistol grip stock List Price $60, Quality S was a 10-gauge with a straight grip List Price $55, Quality T was a 12-gauge or smaller with a pistol grip stock List Price $55 and a Quality U was a 12-gauge or smaller with a straight grip List Price $50.
The 1 on the barrel lug indicates a frame size of 1 which indicates a firing pin center-to-center spacing of 1 1/16-inch. The weight stamp of 3 pounds 13 ounces of the rough barrel set before fitting and finishing. Helped the worker pick a set to get to the finished weight of the gun he was working towards. The small C on the right barrel flat is a mark found on most Parker Bros. Twist and Damascus barrels. The meaning of that C and the small A on the left barrel flat have been lost to the sands of time. |
||||||
The Following 2 Users Say Thank You to Dave Noreen For Your Post: |
08-30-2024, 01:52 PM | #5 | ||||||
|
I very much appreciate the help!! You gentlemen are a wealth of knowledge. Incredible to be able to pull history like that so quickly from something that’s 130yrs old. More pictures attached.
The great great grandfather I refer to was named John F Sullivan and was the first sheriff of Hurley, WI. A town with quite the rich history of needing law enforcement to say the least. Will send all of this info in and hope to get a report back from Parker Bros research to confirm my thoughts. In the process of writing a short story of his life, a few of his guns, and the history of Hurley Last edited by Michael Sullivan; 08-30-2024 at 02:42 PM.. |
||||||
The Following 6 Users Say Thank You to Michael Sullivan For Your Post: |
08-30-2024, 02:41 PM | #6 | ||||||
|
Michael, That is a super cool history of a family Parker. I from Northern Wi. originally, (Drummond area) and its always nice to see a Wi Parker surface. Looks quite the crack behind the left lock if I am not mistaken. Have you looked into what it would take to shoot the gun? Good ol Hurley.... more bars than people.
__________________
If it were easy, everyone would do it. |
||||||
08-30-2024, 03:12 PM | #7 | ||||||
|
Really appreciate that Dean! Some excellent grouse hunting over by you in Drummond. Yep, Hurley is quite the town. Make a point to stop into the iron horse at least once a summer. Have a few old family stories and pictures that are entertaining. Thankfully I don’t believe it’s a crack, just the lighting, although my eyesight is admittedly poor. Thankfully we’ve had a few generations take pretty good care of his guns. A couple more pictures here.
|
||||||
The Following User Says Thank You to Michael Sullivan For Your Post: |
08-30-2024, 03:19 PM | #8 | ||||||
|
Also have not looked in to firing it. Obviously that’s been in the back of my mind but I’m hesitant to risk anything negative happening to it.
|
||||||
08-30-2024, 03:23 PM | #9 | ||||||
|
We can fix that.
__________________
If it were easy, everyone would do it. |
||||||
The Following 2 Users Say Thank You to Dean H Hanson For Your Post: |
08-30-2024, 10:22 PM | #10 | ||||||
|
That is a nice honest gun.
__________________
B. Dudley |
||||||
|
|