|
 |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
04-13-2024, 10:54 AM
|
#3 | ||||||
|
+1 to Dean's comment.
|
||||||
|
|
||||||
 |
 |
 |
| The Following 3 Users Say Thank You to Mike Koneski For Your Post: |
|
|
|
04-13-2024, 03:45 PM
|
#4 | ||||||
|
This might help Jeff
https://www.shotgunworld.com/threads...-shoot.366087/ Checking the barrels for safety means having the barrels evaluated by a barrel specialist with the interest, equipment (wall thickness gauge and bore scope), and expertise to properly do so. If the smith can't tell you wall thicknesses from breech to muzzle, or states "should be safe with low brass", you need another opinion. In light of the age of the wood (not the barrels) it would be reasonable to stick with 1 oz. at 1200 fps target loads. And of course NO STEEL. I clean my pattern welded barrels with a brass Tornado brush. https://www.proshotproducts.com/12-G...USH_p_715.html In the unlikely event that the standard stainless steel brush would fracture, the sharp edge will gouge a damascus barrel.
__________________
http://sites.google.com/a/damascuskn...e.com/www/home |
||||||
|
|
|
||||||
|
|
|
| The Following 8 Users Say Thank You to Drew Hause For Your Post: |
|
|
|
04-13-2024, 05:04 PM
|
#5 | ||||||
|
Jeff, less is more… or, certainly, enough. Take care of the history you’re shooting and someone down the road will thank you.
__________________
"Doubtless the good Lord could have made a better game bird than bobwhite, and better country to hunt him in...but equally doubtless, he never did." -- Guy de la Valdene (from A Handful of Feathers ) "'I promise you,' he said, 'on my word of honor, I won't die on the opening of the bird season.'" -- Robert Ruark (from The Old Man and the Boy) |
||||||
|
|
|
||||||
|
|
|
| The Following 3 Users Say Thank You to Garry L Gordon For Your Post: |
|
|
|
04-13-2024, 09:08 PM
|
#6 | ||||||
|
Thank you for all the responses
|
||||||
|
|
|
||||||
|
|
|
|
|
|
04-13-2024, 09:09 PM
|
#7 | ||||||
|
Go for it. And Dean is right
__________________
Whoever said you can't buy happiness forgot little puppies. Gene Hill |
||||||
|
|
|
||||||
|
|
|
| The Following 3 Users Say Thank You to Mills Morrison For Your Post: |
|
|
|
05-12-2024, 01:45 PM
|
#8 | ||||||
|
Jeff, I shoot a 1901 "G" Damascus 12 on a regular basis, at the Adam's Cup last weekend as a mater of fact. I shoot 1 oz. loads tested at Precision, mild and pleasant to shoot. Will whack a pigeon or Helice, powders clays when I hit'em, great with bismuth for ducks. If the barrels are in good condition my big worry is the wood and the aged shooter! I clean with a brass brush and Hoppes, light oil patch last.
Reloading 2 1/2" Cheditte hulls with 16.8 gr. International, BP's CS12 wad with a 1/8" 20 ga. cork for filler, 1 oz. of 7 1/2 shot. Tested @ 1193 FPS and 5970 PSI. A pussycat to shoot and it WORKS! |
||||||
|
|
|
||||||
|
|
|
| The Following 4 Users Say Thank You to Keith Doty For Your Post: |
|
|
|
05-12-2024, 03:42 PM
|
#9 | ||||||
|
I shoot probably more Damascus/twist barrels than I do fluid steel ! Damascus 8 , Damascus and twist 10’s , fluid steel 12’s and fluid steel 16’s . I’ve liquidated the 20’s and 28 .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
|
|
|
||||||
|
|
|
| The Following 4 Users Say Thank You to CraigThompson For Your Post: |
|
|
|
05-16-2024, 10:03 PM
|
#10 | ||||||
|
Years ago I saw a 50 gallon steel drum that was full of ''Blown Damascus''
Steel barrels. I read the warnings on the shot shell boxes, ''Don't use in Twist Steel or Damascus Barrels, I VALUE MY HANDS AND FINGERS, so I would Never Shoot Twist or Damascus Steel Barreled Guns. In my neck of the woods if you are at a club with one and they know it, they won't allow you to shoot . Harry |
||||||
|
|
|
||||||
|
|
|
 |
|
|
Linear Mode
