Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums General Parker Discussions

Notices

Reply
Thread Tools Display Modes
Weight/Balance Conversation
Unread 12-16-2023, 04:06 AM   #1
Member
Adam Steinquist
PGCA Member

Member Info
 
Join Date: Apr 2019
Posts: 18
Thanks: 29
Thanked 14 Times in 5 Posts

Default Weight/Balance Conversation

Hi all,

Question for the group on where you like your Parker to balance and if you have a preference for balance point based on different purposes. I recently picked up a very nice 16 gauge GH in a 0-frame. It’s a very lovely gun, but the balance is much more toward the rear than I’m used to. Total weight is 6lbs 7oz, which seems on the heavier side for a 0-frame, and while that doesn’t especially bother me, the barrels and forend only weigh 3lbs 1oz while the receiver and stock weigh 3lbs 6oz. This results in a gun that seems to “tip up” while I’m holding it, which is different from the other 3 Parkers that I own (2 16s on 1-frames and a 12 on a 1-1/2 frame).

Curious of this group’s experience with guns that are balanced toward the rear and how you may apply those guns in different ways than guns that are balanced toward the front. I believe I favor guns that are front heavy, but it may be that I just don’t have as much experience with guns that are the opposite.

Last edited by Adam Steinquist; 12-16-2023 at 10:08 AM..
Adam Steinquist is offline   Reply With Quote
The Following User Says Thank You to Adam Steinquist For Your Post:
Unread 12-16-2023, 08:09 AM   #2
Member
mobirdhunter
PGCA Lifetime
Member
 
Garry L Gordon's Avatar

Member Info
 
Join Date: Jul 2013
Posts: 5,095
Thanks: 14,275
Thanked 10,676 Times in 3,371 Posts

Default

Adam, that's a great 2:00 a.m. question, and one to ponder when you can't sleep. I'm sure you'll get lots of answers here that are thoughtful and based on lots of experience.

Obviously the gun that you have confidence in is the one that has the "best" balance, but what's the fun in using only one gun?! Here are my thoughts on my own shooting experience (which is exclusively at game birds -- my Forum friends who shoot clays will have very strong and knowledgeable opinions based on lots of shooting).

For game like grouse and woodcock I can shoot a rear-weighted gun as well as any. The shots are quick and seldom do I get the chance for long crossing shots. This kind of weight balance is great for helicoptering woodcock in very tight cover.

For birds in more open cover where I can be a bit more deliberate, I like the weight between my hands...or slightly weight forward. For the wild quail we most often hunt, longer barrels and weight stability works best for me. Shots are quick, but more deliberate. (For wild Bobs in the timber, I recommend leaving the gun home and just watching.)

For birds like dove and ducks that I can generally be more deliberate about, I shoot a weight-forward gun as well as any, especially on longer crossing shots (which I might add I am terrible at because I don't take many). I've noted that once I get the gun's speed up, that extra weight helps keep it going in the split half-or-less second I have to pull the trigger.

For snipe I like a gun that lets me get on the bird quickly before it starts "juking." A between the hands weighted gun works well for me here.

For rail, I've learned that a gun balanced to the rear works well. I also shoot guns that have more drop than my usual high-stocked guns work well, as often the birds get up close and drop almost immediately. (A gun that you don't mind getting muddy is also a plus.)

For the record, though, I can miss birds with any gun balance, and prefer to do so with a Parker.
__________________
"Doubtless the good Lord could have made a better game bird than bobwhite, and better country to hunt him in...but equally doubtless, he never did." -- Guy de la Valdene (from A Handful of Feathers )

"'I promise you,' he said, 'on my word of honor, I won't die on the opening of the bird season.'" -- Robert Ruark (from The Old Man and the Boy)
Garry L Gordon is offline   Reply With Quote
The Following 8 Users Say Thank You to Garry L Gordon For Your Post:
Unread 12-16-2023, 08:34 AM   #3
Member
Aaron Beck
PGCA Member

Member Info
 
Join Date: Jan 2021
Posts: 320
Thanks: 56
Thanked 207 Times in 128 Posts

Default

Garry has spelled out a strong case for a variety of handling nuances. If your gun doesnt seem right to you, you could explore altering the balance a bit. For one thing, dense fancy grain stocks and rubber butt pads do generally make the stock a bit heavier. Experiment with adding weight up front and see if it shoots better for you. If so, you can explore shifting the balance without altering the overall weight much. Other fit factors can also contribute to the tip up effect.
Aaron Beck is offline   Reply With Quote
The Following 2 Users Say Thank You to Aaron Beck For Your Post:
Unread 12-16-2023, 09:23 AM   #4
Member
Reggie B
PGCA Lifetime
Member
 
Reggie Bishop's Avatar

Member Info
 
Join Date: Dec 2011
Posts: 2,656
Thanks: 3,095
Thanked 3,814 Times in 1,459 Posts

Cool

I have found that I can remedy “butt heavy” guns by shooting lonnnnnng barreled Parkers!!
__________________
"A man who carries a cat by the tail learns something he can learn in no other way."
Reggie Bishop is offline   Reply With Quote
The Following 3 Users Say Thank You to Reggie Bishop For Your Post:
Unread 12-16-2023, 09:57 AM   #5
Member
John Davis
PGCA Lifetime
Member
 
John Davis's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 1,963
Thanks: 4,034
Thanked 7,028 Times in 1,333 Posts

Default

As a trap shooter, I prefer a gun in the 7 1/2 to 8 pound range weighted slightly to moderately forward. An extra benefit of the BTF. Given it is a pre mounted gun game, it helps with a smooth and deliberate swing/movement to a target that is rising and traveling away from you.
__________________
"Life is short and you're dead an awful long time." Destry L. Hoffard

"Oh Christ, just shoot the damn thing."
Destry L. Hoffard
John Davis is offline   Reply With Quote
The Following 7 Users Say Thank You to John Davis For Your Post:
Unread 12-16-2023, 11:46 AM   #6
Member
6pt-Sika
PGCA Lifetime
Member
 
CraigThompson's Avatar

Member Info
 
Join Date: Mar 2011
Posts: 9,024
Thanks: 5,957
Thanked 8,316 Times in 3,700 Posts

Default

I don’t think I can “define” what works best for me or I like best as to balance point . I can say if I pick the gun up and using a very vague term “like the way it feels” I can generally do fine with it on clay or feather targets . In the past changes in drop from gun to gun didn’t bother me in the least . But over the past several years it seems less drop is my friend . Obviously I don’t want an over eight pound gun typically for quail or grouse or walk up pheasants , but for clay targets , tower shoots , pigeon ring , skeet and trap heavier is okay . Although if it’s hotter than hell and I’m rushing around at Koneski’s or somewhere like that the 10 pound 10’s and the 15 pound 8 become a bit much in the heat . I shot a10 1/2 pound hammer 10 at a tower shot in October and by the end of the day that gun got heavy but it was in the low 70’s and I lifted and closed that gun easily 150 times in two hours . And no I didn’t fire each time .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines !
CraigThompson is offline   Reply With Quote
The Following 2 Users Say Thank You to CraigThompson For Your Post:
Unread 12-16-2023, 12:42 PM   #7
Member
Adam Steinquist
PGCA Member

Member Info
 
Join Date: Apr 2019
Posts: 18
Thanks: 29
Thanked 14 Times in 5 Posts

Default

Thanks everyone! And thank you Garry for your very thorough and thoughtful response regarding your experiences hunting. Most of my time is spent chasing ol’ ruff and the timber doodlers and that’s how I expect I’ll be using this most of the time, so hopefully my experience is the same as yours in that regard and this gun ends up being especially well suited for the occasion.

Does anyone have any insight to the production approach Parker took regarding balance? Would a gun have been intentionally balanced forward, rearward, or between the hands because of a customer request or any other reason? Although I know nothing of their production, I would expect they would have had a process to match barrels with frame and wood to give consistent results unless built for various purposes or as requested by a customer.

I realize that we’re only talk about a few ounces, so maybe I’m overthinking it. Just curious if anyone has any insight on the topic.
Adam Steinquist is offline   Reply With Quote
The Following 2 Users Say Thank You to Adam Steinquist For Your Post:
Unread 12-16-2023, 12:55 PM   #8
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 32,073
Thanks: 36,785
Thanked 34,221 Times in 12,647 Posts

Default

I don't ever want to be aware of a gun's balance - rather, I want only to be aware of a fast mount where the bead lines right up to what I'm looking at, without having to be distracted by whether or not it is muzzle or butt heavy. I guess what I like best is a gun, regardless of weight or barrel length, that balances at about the hinge pin or within a half inch forward of it, Behind the pin the gun is too whippy and too far forward makes it an effort and a distraction to bring it to the target.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
The Following 4 Users Say Thank You to Dean Romig For Your Post:
Unread 12-16-2023, 01:01 PM   #9
Member
Adam Steinquist
PGCA Member

Member Info
 
Join Date: Apr 2019
Posts: 18
Thanks: 29
Thanked 14 Times in 5 Posts

Default

Thanks Dean, I appreciate the input. Has that been your experience with the smaller gauges as well, or does it become harder to find guns that balance over the hinge pin as the gauge goes down?
Adam Steinquist is offline   Reply With Quote
Unread 12-16-2023, 01:07 PM   #10
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 32,073
Thanks: 36,785
Thanked 34,221 Times in 12,647 Posts

Default

In my experience, original Parkers with original barrel lengths and original buttstocks all balance quite well for me... That's the way they were all made, unless ordered with specific balance points out of the norm. I have found that oftentimes a restock might radically alter the balance point and we all know shortened barrels most certainly will contribute to a change in balance from how the gun was manufactured.
Wood density is the major factor in poor balance after a restock... sometimes.






.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
The Following 2 Users Say Thank You to Dean Romig For Your Post:
Reply

Tags
16 gauge, balance, weight


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:38 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.