|
11-09-2010, 11:43 AM | #3 | ||||||
|
Yes, I do load them smokeless. I use Rocky Mountain Cartridge (RMC) hulls.
According to RMC any published gauge appropriate load found in reloading manuals or powder manufactures web sites for straight walled hulls will work in their brass hulls because they have the “same inside diameter” as plastic hulls. In my search for the perfect load, I have loaded and patterned many published loads using 1-piece wads and card and fiber wads with success ranging from poor to outstanding. When patterning shotgun loads, barrels often have a mind of their own. |
||||||
The Following User Says Thank You to Jim Schultz For Your Post: |
11-09-2010, 09:16 PM | #4 | ||||||
|
will have to try some of those brass shell loads...thanks for the info..have you loaded any of the10 ga brass do you get a lot of reloads per shell out of the brass shell....i really like reloading my own shells makes the hunt a little better it seems..... charlie
|
||||||
11-09-2010, 09:35 PM | #5 | ||||||
|
Jim, what gave the best results in your 12 gauge loads, fiber or one-piece plastic wads? I would be leaning toward a 1 ounce load of 7-1/2 shot for my 1877 Lifter. All I hunt is Ruffed Grouse. So far the RMC loading tool scores high with users. Do you have their loading tool?
__________________
GMC(SW)-USN, Retired 'Earnest Will' 'Desert Shield' 'Desert Storm' 'Southern Watch' Last edited by Mark Landskov; 11-10-2010 at 08:28 AM.. |
||||||
11-10-2010, 08:23 AM | #6 | ||||||
|
Charlie,
I don't load 10 gauge, but Dave Casey told me that he knows a Cowboy Action shooter that has loaded his RMC hulls over 3000 times. At some point the primer pockets become worn and Dave bores out the back of the hull and threads in a new primer pocket, which is cheaper than buying a new hull. Mark, Let me preface my answer with I believe that all barrels are unique and what works for me may not work for you. MY 12 gauge hulls are loaded with 1-piece plastic wads, non-toxic and though they are adequate, I consider them a work in process. My 1 ounce loads are card and fiber in 16 gauge and I doubt that I could improve on the results. They pattern consistently at the distances I shoot, are low pressure and depending on powder charge, the velocities according to my Chronograph are 1238 and 1328 fps. respectively. Yes, I have Dave's loading tools. He also made me some dippers for field loading from scrap large bore rifle cases and I put wood handles on them. I carry a "loading box" with all of the tools, some powder, shot, primers, shot/powder dippers and cards and filler wads to reload in the field. |
||||||
The Following User Says Thank You to Jim Schultz For Your Post: |
11-11-2010, 06:11 AM | #7 | ||||||
|
If any of you brass shell reloaders are interested I have the following for sale.
I have since moved into the loading of paper roll crimp shotshells. 4 Boxes Primed12ga Magtech Shotshells. $85.00 shipped. http://www.buffaloarms.com/browse.cfm/4,4675.html Included are two boxes of CCI large pistol primers. Shot/powder dipper. Handmade brass loading tools (these will only work in the Magtech 12ga shells) |
||||||
The Following User Says Thank You to Mike Stahle For Your Post: |
11-12-2010, 10:03 AM | #8 | ||||||
|
Mike... PM sent.
|
||||||
The Following User Says Thank You to Cyril Bodnar For Your Post: |
11-12-2010, 10:10 AM | #9 | ||||||
|
I'm assuming that everyone knows that Mag Tech brass hulls are best suited for black powder using card and fiber components.
|
||||||
11-12-2010, 10:37 AM | #10 | ||||||
|
Jim,
FOr the most part you are correct. When the transition from black powder to bulk smokeless many saw no reason to change from the brass hull that had served them for long. In fact the brass hull continued to serve them useing smokeless powder. I have tried IMR 7625 with berdan and pistol primers with out success. They were bloopers. I don't have my hands on the information now but in The American Rifleman some 45 odd years ago there was an article on loading brass hulls with a list of powders and wads. The one powder I remember thatr is still being made is Red Dot. Hammer Doubles hulls were extruded brass with 209 primer pockets. The 7625 powder charges they listed were frightening yet the pressures were low and the velocity was excelent. Harry |
||||||
The Following User Says Thank You to Harry Collins For Your Post: |
|
|