|
08-28-2021, 09:13 PM | #453 | |||||||
|
Quote:
I shoot two #6 frame d grades, one hammerless, one hammer. BP and smokeless. |
|||||||
The Following 2 Users Say Thank You to Alan B. Webber For Your Post: |
08-29-2021, 11:54 AM | #454 | ||||||
|
|
||||||
08-29-2021, 07:00 PM | #455 | |||||||
|
Quote:
Currently I have 2 short 10 gauges my 6 frame NH and my grade 2 top action hammer gun. After carrying the 6 frame a 3 frame feels like a 16 gauge . |
|||||||
08-30-2021, 09:36 AM | #456 | ||||||
|
My #6 frame NH Twist Steel is an impressive gun, but not much fun to carry. As I recall, this is the ten in my collection with factory lettered 3 1/2" chambers. I'm in the middle of starting to reload for the short ten, first time in about ten years. I have two loaders on the bench, a MEC and a PW 375, but can't get any good crimps on cut off hulls. I will load with an over shot wad, sealed with Elmer's wood glue. Testing will tell whether the top wad in the left barrel will move after firing the right barrel. I've loaded eights for years with a top wad and no crimp, so I expect the tens to exhibit about the same result.
|
||||||
08-30-2021, 11:54 AM | #457 | ||||||
|
it will work good bill I have loaded 8 ga 10 ga and even the 410 doing it...not the best looking shells but they still go bang....charlie
|
||||||
08-30-2021, 05:41 PM | #458 | ||||||
|
Well, Charlie, I won't be carrying any six frames in the field, so the crimpless shells should be no problem on the sporting clays course where I can keep an eye on the top wad.
|
||||||
08-30-2021, 06:16 PM | #459 | ||||||
|
Currently I have some RSTs 2 5/8s which come with a nice roll crimp and some 2 7/8 bismuth loads . The Bismuth are 1 1/4oz of 2s and the roll crimped ones are 1 1/4oz of lead 4s . I havnt gotten around to patterning any them as of yet . My 8 gauge loads are glued , I have a roll crimper but I have read mixed results with the BPI one . I lost out on a ebay bid for a vintage 8 gauge roll crimper but once it went over $400 I figured I could live with gluing the overshot card in .
|
||||||
The Following User Says Thank You to Milton C Starr For Your Post: |
08-30-2021, 06:54 PM | #460 | ||||||
|
milt them crimps of yours are really nice...hope you shoot that bismouth load soon I m wondering how it will pattern...charlie
|
||||||
|
|