2 7/8" 10ga Reloading Data

[J.B. Books]

Originally Posted by Cal Lego

Hi J.B. I want to say thanks for posting the spread sheet. i did notice what appears to be an error in the amount of Herco used. I think the numbers must have about 10 grains added to the correct amount. I was using Sherman Bell's loads of 30 grains Herco and 1-1/4 oz. I might see going to 33 or maybe even 35 grains but 45 grains-29 grains Unique sounds right and Unique in a 10 gauge is right around the Herco range.

You are welcome, I just double checked the spreadsheet against my cited sources of that loading data, the 1968 and 1970 Hercules Reloading guides. The amount of Herco stated is correct as published in those guides. I believe those powders have changed since that was published and I put a note in the sidebar in red advising that I would reduce these charges by 15 to 20%. Perhaps advising a reduction by 25% would be more prudent.

[Cal Lego]

Originally Posted by Pete Lester

You are welcome, I just double checked the spreadsheet against my cited sources of that loading data, the 1968 and 1970 Hercules Reloading guides. The amount of Herco stated is correct as published in those guides. I believe those powders have changed since that was published and I put a note in the sidebar in red advising that I would reduce these charges by 15 to 20%. Perhaps advising a reduction by 25% would be more prudent.

Those sound like some pretty hot loads! I remember loading 31 grains of Herco in a 12 gauge M12 when I was 16 y.o. and that was what I had read somewhere. 1-1/2oz. shot for a 2-3/4" baby magnum. Those were some mean loads! I notice others are using 30 grains with Unique and PB, 2 of my favorites.

Those may be perfectly safe loads for all I know though. I'm with you on the reduction in charge to start with though.

Once again, thanks for getting all this stuff together. I'm going to be using at least one of these in 1-5/8 oz. this spring for my turkey hunt.

[KCordell]

Hey has anyone tried the 33.3 gn longshot load with SP10 and nice shot or any other longshot load with nice shot? I want to load up 10 of these and try them on waterfowl. They said pressure is 8780...it's a bit hotter then what I wanted....suggestions please...all comments are very welcome...

I am asking about longshot as I have an entire container begging to be used.

[Big Friend Ten (BFT)]

I use that load with 1 3/8 oz Nice Shot. The #2's are devastating on Canada geese well past 50 yards!

Mark

[OH Osthaus]

managed to get my hands on a supply of Federal Hulls and have loaded some of these, now all I need is geese

[KCordell]

Fantastic.. already cut my 10 gauge federal halls this evening I'll start loading them tomorrow. Any recommendations to roll Or crimp? again, I am using the SP10 wads

[StubTwist]

Originally Posted by KCordell

Hey has anyone tried the 33.3 gn longshot load with SP10 and nice shot or any other longshot load with nice shot? I want to load up 10 of these and try them on waterfowl. They said pressure is 8780...it's a bit hotter then what I wanted....suggestions please...all comments are very welcome...

I am asking about longshot as I have an entire container begging to be used.

This is what I use. I just wish I could get more Longshot powder. Echoing what Mark said, this is a great load. Load them up, you will be happy. The pressures are fine. Use the fold crimp and I put a 1/4" cork or fiber wad below the shot to raise the shot column. I have no hesitation to use them in all my 10's.

[OH Osthaus]

The other issue is the nice shot itself. Wonder when or if they will return to production

[KCordell]

Originally Posted by Frank Cronin

This is what I use. I just wish I could get more Longshot powder. Echoing what Mark said, this is a great load. Load them up, you will be happy. The pressures are fine. Use the fold crimp and I put a 1/4" cork or fiber wad below the shot to raise the shot column. I have no hesitation to use them in all my 10's.

Now, I am really starting to get excited.....

[Cal Lego]

I wanted to load up some of those Sherman Bell Loads but have Heavyshot. I didn't want to wipe out the barrel and also don't see any loads listed in the Bell loads for heavy shot. This is for a 10 ga. 2-7/8 Remington Double.