Gun Smiths

[TerryFisher]

One more

[TerryFisher]

#21.jpg

#22.jpg

#24.jpg

#25.jpg

[TerryFisher]

Originally Posted by Dan Steingraber

Take the forearm off and push up on the plunger looking thing (that's a technical term) sticking out of the bottom of the action and the gun will open and the barrels lift right off. The "plunger looking thing" functions like a top lever to release the barrel lock up.

Did you have a chance to look the pics?

[TerryFisher]

Did you have a chance to look at photos?

[Robert Luttgen]

I am new here on the forum, but I just did some research on my Parker and might be able to steer you in the right direction. I had a little trouble reading the serial number, but I believe that it is 20084. If so, then your gun was manufactured in 1880. The other markings to too hard to read, but they are all explained in this website. Just go to the home page and look for "Parker Identification". You will find a step-by-step guide to reading the markings, and how to interpret them. I found out that your gun (assuming serial number 20084) does have Surviving Factory Records. I just paid the $42 dollars for a Parker Research Letter - you might consider doing the same. Hope this helps.

[TerryFisher]

Thanks Robert, I have done some more exploring and found a few more things. I was going to do that research submittal. I found some more markings that I don't know what they mean Like the T with a curved line over and under it. THINKING maybe it mean Plain Twisted???? Also a symbol that looks like a fat red cross symbol and some additional numbers. Well Guess I will send in my request too.. Thanks again..

[Mike of the Mountain]

If you want to refinish those bbls contact Breck Gorman in Beaufort, SC. He may be able to finish the action too, but you'll need to ask him. He does excellent finish work.

[Robert Luttgen]

Chuck Bishop just sent me his preliminary research on my gun. I am not sure if you read it, but in my "introduction" post I mentioned that my Parker was brought home from Japan at the end of WWII by my father. Sure enough Mr. Bishop found the word "Yokohama" in the Parker order book. Apparently my Parker was part of a larger order shipped to Japan on March 14, 1918 that included "5 GH's with Damascus barrels, 3 PH guns with Parker Steel barrels, and 2 VH's". That little bit of information just made my day - I highly recommend ordering the Research Letter.

[Robert Luttgen]

And I forgot to mention it, but I am from the Miami area and have been looking for someone to work on my Parker as well. The general consensus for a gunsmith of this quality near Florida seems to be:

Bill Schwarz
767 Brushy Top Rd.
Unit 6716
Ellijay, GA. 30540
(706) 276-7668

I am trying to get hold of him now.

[John Cleveland]

Robert, I can unequivocally recommend Bill. About 2 months ago, I picked up my 1879 hammer uplift from restoration by Bill. I went to him after several recommendations here.

He did an amazing job. I could hardly believe it was the same gun. In the thread below, Richard Flanders commented, “This gun will most certainly reset the standard of whether someone will get what seems like a total wreck of a gun restored or not.”

The thread linked to below was my initial post about my gun, with before pictures and after pictures.

https://parkerguns.org/forums/showth...ght=Waste+time

I think that comparing the “before” and the “after” pictures would answer any concerns about his work.

BTW, a big thanks to all the forum members who helped me out in my quest to restore “Lazarus”, as Todd Allen called it. Robert and Terry you are lucky to have this resources available.

You can only get Bill by phone. He does not do computers. You almost need 4wd to get to his house—-not really, but “almost” because I did it in my Tesla, but with the suspension at the highest level and creeping in places. . Totally worth it! Fortunately, I only live about an hour and 20 minute drive through beautiful mountain roads from him. You may want to ship from MIA, …or not. It would not be a bad drive from ATL (non-rush hour), and you could spend some time in the mountains. Just up the road in Blue Ridge there is some great trout fishing, if you enjoy that too.