|
02-08-2022, 12:27 PM | #23 | ||||||
|
https://www.hodgdonreloading.com/
http://www.alliantpowder.com/reloaders/default.aspx Look here for loads. |
||||||
02-08-2022, 12:36 PM | #24 | ||||||
|
If you remove your stock, properly and carefully, and check the inletted head to see if it's good wood or if it's soaked with old gun oil, that will give you a good idea on the condition of the stock. You can always do a glass bed reinforcement or have a smith/stocker do it for you if that would alleviate any concerns you may have.
|
||||||
02-10-2022, 02:37 PM | #25 | ||||||
|
2 1/2" Cheddite hulls
13.2g Green Dot SW 20 or Sport 20S BP wads 3/4 oz shot for a spreader load I use the BP Brush Wad and you can add an X-Stream Spreader insert on top of the brush wad to really open the pattern up for close work. |
||||||
|
|