VH ST Doubling

[David Penland]

Here you go.

[Cold Spring]

First pic with R S L stamps is typical for the first early design Miller conversion.

[Bill Murphy]

Yup, a first generation Miller without the identifying stamp on the trigger itself.

[Cold Spring]

Originally Posted by Bill Murphy

Yup, a first generation Miller without the identifying stamp on the trigger itself.

Or MILLER is line stamped on the trigger a little higher than typical and it's hidden by the body of the trigger guard. There's plenty of surface area available. This one is typical on a Fox.

.

[David Penland]

Had the trigger pull checked and it is around 4 lbs. loosened the back tang screw so it was flush with the tang. Tried R/L and it works sometimes and double’s sometimes. L/R works. The gun is in need of a good stock. The wrist is very thin and there is a repair.

[Mike of the Mountain]

Thin wrist with a repair. Could be wood or something in the repair is making contact with something in the trigger mechanism?

[David Penland]

I took it apart. Insides are pretty contaminated.

[David Penland]

Here is the trigger

[David Penland]

Here is the stock.

[B. Dudley]

That stock is more than likely the issue