|
 |
 |
|||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||
 |
 |
08-21-2022, 02:03 PM
|
#13 | ||||||
|
The PGCA has no records whatsoever of that serial number.
In fact, as stated earlier in this thread 1844 (probably a typo) is the earliest gun in the existing records. You’ll need to have the chambers and bores accurately measured in thousandths of an inch. .
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
|
|
||||||
 |
 |
 |
|
|
|
08-21-2022, 02:03 PM
|
#14 | ||||||
|
Take a ruler and hold it across the muzzle to measure the inside diameter. If its around 3/4 " =/- 1/16 its probably a 12 ga. If its closer to 5/8" its probably a 16 ga. If you have more sophisticated measuring devices, the muzzle diameter of a full choke 12 ga. is usually around .700 and a 16 ga. around .635, ususally within 10 thousandths either way. FWIW
|
||||||
|
|
||||||
|
|
|
| The Following User Says Thank You to Mike Poindexter For Your Post: |
|
|
|
08-21-2022, 02:18 PM
|
#15 | ||||||
|
Grab some spent 12 and 16 hulls and start trying them on for size.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
08-21-2022, 06:31 PM
|
#16 | ||||||
|
Hopefully this helps, I removed the forend and took a picture of two different areas that have markings/numbers, the serial on the receiver, and numbers under the forend. What I found interesting is the serial number under the forend is in the wood and matches the receiver but there is also another number in the metal.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
08-21-2022, 06:32 PM
|
#17 | ||||||
|
The number on the barrel flat is the order number, not the serial number.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
|
|
|
||||||
|
|
|
|
pics | |
|
08-21-2022, 06:33 PM
|
#18 | ||||||
|
pics
pics of the markings
|
||||||
|
|
|
||||||
|
|
|
|
|
|
08-21-2022, 06:38 PM
|
#19 | ||||||
|
Try taking other pictures. The only one in focus is the one in the wood.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Dean Romig For Your Post: |
|
|
|
08-21-2022, 06:57 PM
|
#20 | ||||||
|
Regardless what gauge it turns out to be, it appears to be in very nice condition, and very early.
As I recall, Jay Oliver has a couple of the earliest known. He’ll chime in here, I’m sure. |
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to edgarspencer For Your Post: |
 |
|
|
Linear Mode
