![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#13 | ||||||
|
![]() |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#14 | ||||||
|
![]()
Use spreaders. IF your going to open the choke I'd do it as a fixed choke not a screw in type.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#15 | ||||||
|
![]() |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#16 | ||||||
|
![]()
Some 16ga spreader options.
http://www.ballisticproducts.com/Spr.../products/661/ http://www.polywad.com/spredr-inserts.html
__________________
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#17 | ||||||
|
![]()
Spreaders in a 16 are not hard to come by. RST makes very good ones. I wouldn't do screw in chokes because IMHO you have an older gun with this peconcieved modern contraption threaded into the barrel. I just really don't like them and have opened the chokes on a couple of Parkers but did it by going from full to Mod by reaming out the choke. I have never changed a choke tube even when I had guns with this option. I passed on a nice Purdy 16 once because someone put Briley thin wall chokes in it!
![]() |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Rich Anderson For Your Post: |
![]() |
![]() |
![]() |
#18 | |||||||
|
![]() Quote:
Bore was dirty, I scrubbed it out last night and she came up absolutely new. No wear on the lower tang. So the gun was in a closet somewhere where it survived for a generation or two. Last night I had made my decision to have it threaded, and now I've changed it again. I'll get the spreaders and see how she shoots at skeet. I can drop a spreader into the chamber and slide a normal shell up the magazine and have a non-selecting double barrel, right? These old Model 11's are almost considered as junk in the collector world. I think they are much better shotguns than that. They work like a Browning, but heft a little differently and are a slightly different shape. Also the bead is mounted on a little pedistal to compensate for the thickness of the receiver. If held so the pedistal can be seen the gun will shoot a little high so you can get some float at the trap range, which I like and it compensates for the lower comb. I think - I have yet to shoot the gun. I got it just a few days ago. |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#19 | |||||||
|
![]() Quote:
Besides, it is the journey, not necessarily the destination, that is the most fun. A reloading friend or a good reloading supply store can be most helpful for spreader information. Best Fishes, Steve Kleist Ely, MN |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Steve Kleist For Your Post: |
![]() |
![]() |
![]() |
#20 | ||||||
|
![]()
I enjoy reading these threads to see how people are approaching things. Out of all my shotguns I have and have had (quite a few) only one has an adjustable choke, it's a Stevens 94 in 16 ga with the tenite stock and a factory polychoke. I set the choke to what I expect to need before entering the field then leave it, all the others I just shoot what choke it has.
I still remember a tag line from a member on another forum: " Most misses are in feet and a choke only gives you inches". I'm not knocking screw in chokes, I just know what works for me. Jack Kuzepski |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Jack Kuzepski For Your Post: |
![]() |
|
|