|
03-07-2024, 10:19 AM | #13 | ||||||
|
It looks like crimp for whatever reason is stronger than the side of the shell. In other words, it takes less effort to tear the wall of the shell than to open the crimp.
|
||||||
The Following 2 Users Say Thank You to Chris Travinski For Your Post: |
03-07-2024, 11:50 AM | #14 | ||||||
|
COB used those shells in 28g here last year at our four day event. He was shooting a graded 28g and one of the shells bulged his barrel. If I remember correctly the manufacturer said they would take care of his gun. That's the last I heard. You'd have to ask COB what became of the gun.
I've used their shells in 12g and 20g with no problems. I shot in a charity event at Hausmann's where the same shells were given to every entrant, also with no problems. As for "cheap", they are certainly not! Morris actually pressure tested their shells and said they were truly low pressure as advertised. |
||||||
The Following 3 Users Say Thank You to Mike Koneski For Your Post: |
03-07-2024, 11:42 PM | #15 | ||||||
|
Most likely what Remington engineers called an “occlusion”; a piece of foreign material was in the plastic and did not allow complete homogeneous material when extruding. “Dirt in the mix”. The partical could end up anywhere in the mixture. We would see them on occasion. Just need to make sure nothing is left in the barrel.
|
||||||
The Following 4 Users Say Thank You to J. Scott Hanes For Your Post: |
|
|