Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums Parker Single Barrel Trap Shotguns

Notices

Reply
Thread Tools Display Modes
Unread 07-04-2022, 05:41 PM   #11
Member
Jim McKee
PGCA Lifetime
Member

Member Info
 
Join Date: Nov 2015
Posts: 448
Thanks: 1,687
Thanked 602 Times in 186 Posts

Default

Have not yet been able to take the SBT barrel off of the action. I do not want to damage this nice Parker.
What is the best way to clean these with barrels still on the action?
“If the barrels won't come off with the fore end off, and the gun is cocked, part 41, 42, or both are probably gunked up, and a good cleaning will cure it.”
Thanks and Happy 4th Of July to all
Jim
Jim McKee is offline   Reply With Quote
Unread 07-05-2022, 10:53 PM   #12
Member
Mike Franzen
PGCA Lifetime
Member
 
Mike Franzen's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 2,934
Thanks: 1,323
Thanked 4,560 Times in 1,371 Posts

Default

Did you try closing the action with the forearm attached and dry firing the gun? Opening it up will recock the ejector. Close the action and then remove the forearm. This should allow the barrel to be removed. If not go to plan B
Mike Franzen is offline   Reply With Quote
Visit Mike Franzen's homepage!
Unread 07-06-2022, 10:31 AM   #13
Member
edgarspencer
PGCA Member
 
edgarspencer's Avatar

Member Info
 
Join Date: Sep 2011
Posts: 6,344
Thanks: 3,164
Thanked 12,295 Times in 3,284 Posts

Default

Barrels not freely releasing from the receiver has nothing to do with ejectors, and occurs on extractor guns also.
With the Fore End Removed you will see the unhooking pin extending out of the front of the receiver. The fore end prevents this pin from protruding, and it, in turn prevents the unhooking slide from allowing the cocking hook, on the barrel from disengaging from the cocking crank. When the fore end is removed, the unhooking pin should move forward, by it's spring. It may be that the unhooking pin, itself is gummed up enough to not fully move forward, but more likely, the unhooking slide itself is also gummed up and not allowing the cocking hook and cocking crank to disengage from each other.
Simply removing the trigger plate will disengage the hook and crank, but if the unhooking slide and pin are dirty, putting it back together, without a thorough cleaning, will get you right back to where you were
If you don't have proper gunsmith's screwdrivers, just send the gun out to Brian or any other competent gunsmith for a good cleaning.
edgarspencer is offline   Reply With Quote
The Following 3 Users Say Thank You to edgarspencer For Your Post:
Unread 07-14-2022, 07:33 PM   #14
Member
Jim McKee
PGCA Lifetime
Member

Member Info
 
Join Date: Nov 2015
Posts: 448
Thanks: 1,687
Thanked 602 Times in 186 Posts

Default

Sent the SBT gun to Brian Dudley. He got the unhooking issue resolved and found that the problem was the cocking hook on the barrel was messed up. someone had been on it riling and altering the shape to where it would not allow it to unhook. He replaced the hook.
Thanks to everyone who offered suggestions.
Jim
Jim McKee is offline   Reply With Quote
The Following 2 Users Say Thank You to Jim McKee For Your Post:
Unread 07-14-2022, 08:07 PM   #15
Member
GunnerGrilli
PGCA Lifetime
Member
 
GunnerGrilli's Avatar

Member Info
 
Join Date: Nov 2018
Posts: 248
Thanks: 1,887
Thanked 917 Times in 151 Posts

Default

Jim,


Please send some pictures of the Ol Girl when you have time.........I just love seeing the different SBT's!!!!


Glad you got her going. Now take it to the range and smoke some.......


Thanks,

Bobby
GunnerGrilli is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:25 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.