|
10-26-2011, 04:32 AM | #13 | ||||||
|
Yes, they must be high pressure with their advertised velocities. The only Parkers I use steel shot in have sleeved on, fluid steel barrels. One is a 12ga #2 fame VH with skeet chokes; the other is a 10ga #3 frame NH with tight chokes, but here I shoot 12ga shells through 3&1/2" Guage Mate inserts. I have shot 12ga bismuth in my Trojan and my GH with Special Steel barrels. I have not used anything but lead in a damascus or twist barrel. I mentioned Black Cloud wads as I have recovered some and they are heavy plastic with no slits or "petals" in the cup, only in the base to open when leaving the muzzle.
|
||||||
11-01-2011, 01:15 PM | #14 | ||||||
|
I, Also have shot several hundred rounds of 3-1/2" Bismuth in my Ph 32" Steel barrel gun and the barrels are mirror bores, Now my shoulder was a little worse for wear!
|
||||||
11-01-2011, 04:58 PM | #15 | |||||||
|
Quote:
I would like to shoot non-toxic in my Sterlingworth. It's a 1929 gun. I think the tubes are stamped "Krupp steel". It's a Full and Modified gun. Was originally Full and Full. Standard grade. I have not shot steel in it. I haven't shot any kind non-toxic in it. I would like to however. I also bought a Spanish double that had a pretty good bulge about eight inches from the muzzle. Obviously shot with the old steel shells which did more to damage barrels than the new ones. The owner, who must have been a duck hunter, dumped the gun after he damaged it. I paid $450 for an engraved Spanish gun with green canvas case with a pimple in the left barrel. Had it removed and reblued. Also had the chokes opened to light full and modified. Moral of the story? I'm nervous about shooting steel shells in any double. Not sure about tungsten, nice shot. I have not been able to find Bizmuth shells anywhere. I had an old pre 855,000 Ithaca Model 37 12 threaded for screw in chokes. I shoot steel through it. It's IC choke protrudes about an inch and a half from the muzzle. I would not hesitate to shoot Black Cloud through it, but have yet to do so. |
|||||||
01-14-2012, 07:29 PM | #16 | ||||||
|
Can I take it then that no one has a problem shooting Black Cloud shells through an old "liquid" steel gun, such as a Sterlingworth?
|
||||||
01-14-2012, 11:13 PM | #17 | ||||||
|
My thoery is lower velocity means lower preassure. These new high velocity shells make me nervious so I look for older production steel shot shells. Dave
|
||||||
01-15-2012, 09:04 AM | #18 | ||||||
|
I believe all factory ammo whether lead or steel is high pressure close to SAAMI maximum and it is done to insure reliability in gas operated autoloading shotguns.
I am not engineer but I also believe the thick plastic wads used in steel shells is to prevent scoring the barrel. I don't think it fully protects from the potential of choke bulging/rib loosening as the steel pellets are not going to give as much as lead as they shift when entering the constriction. |
||||||
01-15-2012, 11:57 AM | #19 | ||||||
|
I wonder if the non-toxic shot requirement is really doing any good for the duck population. I mean, are they worth the effort? Or is it just another ploy by the left to make things harder and more expensive for hunters and shooters?
|
||||||
01-15-2012, 05:35 PM | #20 | ||||||
|
The ducks, and our old guns would have been better off if the law required that we use lead shot with some sort of premium stamp (about equal to the steel shot vs. lead premium) and that incremental revenue being applied to purchse and maintence of habitat, but, unfortunatley, that ain't going to ever happen. Too rational.
|
||||||
|
|