|
03-20-2020, 11:59 AM | #13 | ||||||
|
So, as you can see we have barrel slots for a 1 or 2 frame 12 ga. 34" barrel on the top and anything form 30" to another 34" barrel for the other side. We also see the addition of stock support blocking and the start up of where the oil bottle and snap caps will be going.
I have come to a cross roads as to the carrying handle. Do I use either of these handles pictured? Neither of these handles will be inlaid in the traditional style because the brass plates of the handles are very thin. I cut out the inside of one handle so it looks more traditional. Do I leave it without any handle and make it strictly a display case? Any input is welcomed. You can always PM me. Hopefully this weekend I can address the little brass hooks on the front of the case. Stay tuned!!
__________________
If you are going to enter the race, you might as well try and win it. |
||||||
The Following User Says Thank You to Matthew Hanson For Your Post: |
03-20-2020, 12:22 PM | #14 | ||||||
|
Matt, I would put the snap caps on either side of the Oil bottle and leave the block behind the stock loose so if someone had a longer stock it wouldn't be a problem, as far as the handles, I would leave that up to the purchaser as to what he wants to do.
|
||||||
03-20-2020, 03:20 PM | #15 | |||||||
|
Quote:
Thanks!
__________________
If you are going to enter the race, you might as well try and win it. |
|||||||
The Following User Says Thank You to Matthew Hanson For Your Post: |
03-20-2020, 03:27 PM | #16 | ||||||
|
Ok we now have brass hooks!! Nice heavy and fit and work like a glove!
__________________
If you are going to enter the race, you might as well try and win it. |
||||||
The Following User Says Thank You to Matthew Hanson For Your Post: |
03-20-2020, 03:40 PM | #17 | ||||||
|
Matt, I would put a center traditional keyed lock in the middle and leave the hooks.
|
||||||
03-20-2020, 03:51 PM | #18 | ||||||
|
Hey Eric there is the original brass lock in the center. I had to buy three old keys and file them until I got one to work.
__________________
If you are going to enter the race, you might as well try and win it. |
||||||
03-21-2020, 07:16 AM | #19 | ||||||
|
Then you are good to good, leave as is.
|
||||||
03-21-2020, 08:27 AM | #20 | ||||||
|
Put the snap caps in their own compartment, either side of the oil flask.
|
||||||
The Following 2 Users Say Thank You to edgarspencer For Your Post: |
|
|