![]() |
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#13 | ||||||
|
![]() |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#14 | ||||||
|
![]()
When the choke taper gets up into the 6+" range I'll admit it does seem long. But that is very common on some Parkers.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#15 | ||||||
|
![]()
mills i believe that weight had something to do with thickness of the barrel...my light weight guns all have thin barrels....have not measured them but you can tell by eye that they are thin....charlie
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#16 | |||||||
|
![]() Quote:
The variations in Parker barrels amazes me. They seemed to really know what they were doing though |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Mills Morrison For Your Post: |
![]() |
![]() |
![]() |
#17 | ||||||
|
![]()
You are right Charlie. It seems if they wanted to lighten the weight of gun, they made the barrels thinner.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#18 | ||||||
|
![]()
We did not measure the wall thickness of 71,767.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#19 | ||||||
|
![]()
This information probably just confirms the obvious, but I have a GH 12 that has 30 inch Damascus barrels and is built on the #1 frame. It's unstuck barrel weight is 3 lbs 9 oz and the barrels weigh 3 lbs 2 oz. The gun weighs 7 lbs .55 oz. The chokes are .040 in each barrel and are about 4 inches long each. The minimum wall thickness at 9 inches from the breech is .047 for both barrels. This gun letters as weighing 7 lbs.
The barrel strikers could work wonders! Yes, these are factory guns, but when you look at the individual guns, they are much more like custom made than one would think at first glance.
__________________
"Doubtless the good Lord could have made a better game bird than bobwhite, and better country to hunt him in...but equally doubtless, he never did." -- Guy de la Valdene (from A Handful of Feathers ) "'I promise you,' he said, 'on my word of honor, I won't die on the opening of the bird season.'" -- Robert Ruark (from The Old Man and the Boy) |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#20 | ||||||
|
![]()
Dean, we don't know, by measurement, what the chamber wall thickness is in the #1 frame ten gauge, #71767. However, this measurement can be calculated by knowing the pin separation and breech dimension of a #1 frame gun. The formula would be to know the breech dimension, subtracting the pin separation, dividing by two. Maybe another known dimension would be involved, but I think I gave us enough to calculate the wall thickness of the breech, at least at the outside.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|