A heck of a blowout!

[Drew Hause]

Or a powder substitution

A 3 Dr. Eq. load of “E.C.” No. 1 or “Schultze” was 42 grains by weight. Upon introduction, 3 Dr. Eq. of Dense Smokeless Ballistite was 24 grains; Infallible 22 grains. (Later the powders were equivalent)

Substituting a Dense Smokeless powder for Bulk Smokeless powder would double the charge. It has been estimated that 50 grains of Infallible or Unique could reach 30,000 psi - which is where Bell's damascus and Vulcan barrels ruptured.

[Dean Romig]

Good points Drew!





.

[Steiner]

Originally Posted by Brian Dudley

I finally got around to stripping the frame that these barrels came off. I found that the frame had also been crack through damn near all the way to the bottom! Someone welded it back up in the past for cosmetic/display purposes I guess. This was one hell of a failure.

Attachment 118178

Attachment 118179

Wow

[Mills]

Better retire that one. Hope there are some usable parts not damaged by that failure

[Harold Pickens]

Never having owned or really looked that close at a lifter, could top lever hammer gun barrels be fitted , or are the lugs different. Of course this guns welded frame would rule this gun out.

[B. Dudley]

Originally Posted by Harold Lee Pickens

Never having owned or really looked that close at a lifter, could top lever hammer gun barrels be fitted , or are the lugs different. Of course this guns welded frame would rule this gun out.

No. The lifter frames are shorter. By a lot.