|
02-04-2011, 01:58 PM | #13 | ||||||
|
Interestingly enough I have read that Remington "usually" stamped an E on the barrel tubes with the grade to indicate an ejector gun (mine has no E). However they were reported to be inconsistent with that practice. One fellow on the Doublegun site reports having seen two other 1894 extractor guns with ejector forends and no E stamping. Here is another one. I am getting a sense some extractor model 1894's may have left the factory with ejector forend iron.
http://www.auctionarms.com/search/di...emnum=10156213 |
||||||
02-04-2011, 02:22 PM | #14 | ||||||
|
That could be Pete but look at the ejector slote on the underside of the rib extension... the barrels appear to have been intended for an ejector gun too.
|
||||||
02-04-2011, 04:29 PM | #15 | ||||||
|
From the Doublegun BBS:
"Originally Posted By: Ithaca16 I have collected Remington 1894 and 1900 for over 35 year's.And also gunsmithing work on them all that time. The forend look's normal on this gun. The large opening at the end of the forend is on both extractor and auto ejector gun's. The ejector forend has some more milling that must be done to the back sides and at the end the fit the ejector parts,hammers ,springs, etc. Some time's an extractor gun will have a forend iron on it that is milled out for the ejector parts. Maby one in 20 gun's. The extractor is normal on this gun,those two slots are on both extractor and auto ejector guns. Terry" I Just got back from the local gun club where I met Scott who measured the gun and we put a couple of off hand test shots on paper. Chambers 2 7/8" Bores - L .796, R .803 Chokes - L .045, R .048 Both chokes start their taper 6 to 7 inches before the muzzle. Wall thickness 6" ahead of breech R - .128, L - .127 Wall thickness before the chokes R - .040, L - .042 Shot offhand with 1 1/4 ounce lead 6 74% at 40 yards. 72% with 1 1/8 ounce 7.5's |
||||||
The Following 2 Users Say Thank You to Pete Lester For Your Post: |
02-04-2011, 08:42 PM | #16 | ||||||
|
those ducks are in trouble with that gun.... charlie
|
||||||
The Following User Says Thank You to charlie cleveland For Your Post: |
03-29-2012, 07:20 PM | #17 | ||||||
|
I agree with the post quoted from Terry (Ithaca16) that this gun has always been an extractor gun. That is just the way Remington did it, using the same forearm iron for both extractor and ejector guns.
By a few years into the production of the Remington Hammerless Double Barrel Shotgun, the extra cost for ejectors was down to $5. When the guns were introduced in the October 1894 Remington Arms Co. catalogue, ejectors were $22.50 extra, and were still that in the November 1895 catalogue. I don't have a catalogue for 1896, but by the April 1897, Remington Arms Co. catalogue, that introduces Ordnance Steel and Remington Steel barrels, the price of ejectors is dropped to $5. The catalogue in the fall of 1897 adds the 16-gauge guns to the offerings. From beginning to end, the Remington Arms Co. catalogues state that the B-/BE-Grade came with "Fine three-stripe Damascus barrels". But, here we have B-/BE-Grades with "Etoile 3 B.P." and "Boston 2 S.J.", while my BE-Grade 12-gauge of 1895-vintage has "Chain J." barrels -- |
||||||
The Following User Says Thank You to Dave Noreen For Your Post: |
03-30-2012, 08:51 AM | #18 | ||||||
|
Thanks Dave, your knowledge of such things is appreciated. Beautiful pattern on your barrels. In spite of the lack of ejectors and Boston 2S.J on my gun I realize that my 1894 10 bore B grade is on the rare side and in high condition. I have gained a lot or respect for the Remington 1894 after owning and shooting this gun for a little more than a year. Remington built a quality double yet somehow missed being recognized as one of the American classic's.
|
||||||
03-30-2012, 09:11 AM | #19 | ||||||
|
Pete,
Remington dropped production of their SxS's in favor or those new fangled pumps and the Remington built Browning Auto 5, the Remongton Model 11. At the time it was probably a good business decision. Look at all the Remington pumps and autoloaders that have been built at a profit for Remington! I've recently gained an appreciation for the Remington 1894 SxS after seeing a friend's Bachelder-restored 1894's, a 12 gauge chain Damascus and a 10 gauge. Wow! Those long actions look fantastic with new case colors! Mark
__________________
Don't hunt with a gun that will embarrass your dog! USMC Retired USMC Distinguished Marksman USMC Distinguished Pistol Shot NRA Benefactor - Ring of Freedom member |
||||||
The Following User Says Thank You to Mark Ouellette For Your Post: |
|
|