The Lost and Found List

[Bill Murphy]

Looking for eight gauge Twist Steel barrels # 121593 and also the forend with the same number. Thanks. Any set of eight gauge barrels for a hammerless gun would be welcome.

[James L. Martin]

Looking for 12ga GH Dam barrels # 91070

[Jack Bright]

I have some information on Parkers which may have been parted out.

Some background: I had ordered a trigger plate and some other parts for 56901 from Numrich, and, due to some ordering quirk, I received three orders. For the record, I received trigger plates from 63538 (swirl engraving), 139465 (pheasant/bird engraving), and from 175201 (plane). Also, forend tips received were from 2358? (plane), 87674 (engraved), and from 88603 (engraved).

On another purchase on ebay I received a forend lock from 223184.

It can be presumed that these guns had been parted out. I thought that the Association might be keeping records of such findings and wanted to list this information for the benefit of our members.

I’m “restoring” 56901, a grade E 10 gauge, with a #2 frame. Sometime in the distant past the correct #2 barrels were replaced with #3 10 gauge 32 inch Damascus Steel barrels from 58692. Don’t know why or what happened to 58692 but it was likely parted out too. I’d very much like to obtain a set of #2 10 gauge 32 inch Damascus Steel barrels to return the gun to its original configuration. Can anyone help? I’d also like to obtain a set of #2 12 gauge steel barrels to allow me to occasionally actually shoot the gun. Can anyone help here too?

[Jack Bright]

Originally Posted by Jack Bright

I have some information on Parkers which may have been parted out.

Some background: I had ordered a trigger plate and some other parts for 56901 from Numrich, and, due to some ordering quirk, I received three orders. For the record, I received trigger plates from 63538 (swirl engraving), 139465 (pheasant/bird engraving), and from 175201 (plane). Also, forend tips received were from 2358? (plane), 87674 (engraved), and from 88603 (engraved).

On another purchase on ebay I received a forend lock from 223184.

It can be presumed that these guns had been parted out. I thought that the Association might be keeping records of such findings and wanted to list this information for the benefit of our members.

I’m “restoring” 56901, a grade E 10 gauge, with a #2 frame. Sometime in the distant past the correct #2 barrels were replaced with #3 10 gauge 32 inch Damascus Steel barrels from 58692. Don’t know why or what happened to 58692 but it was likely parted out too. I’d very much like to obtain a set of #2 10 gauge 32 inch Damascus Steel barrels to return the gun to its original configuration. Can anyone help? I’d also like to obtain a set of #2 12 gauge steel barrels to allow me to occasionally actually shoot the gun. Can anyone help here too?

Two corrections to my earlier listing follow:
First, the bottom/trigger plate numbered 175201 should be 115201. Rechecked this time with my glasses on.
Second, I checked my Parker Letter and the original 10 ga barrels for 56901 were 30 in. So I'm looking for a pair of Damascus Steel 10 ga. #2 frame 30 in barrels, not 32 in.

[jsd245]

Local guy was advertising theses barrels so I picked them up. They are damascus thought he serialization book said this gun was supplied with twist barrels, it also said a second set of barrels was supplied so these must be them.

They are a bit rough, with the left barrel having some dents and what looks a bulge that may have been attempted to repair. To my unpracticed I I don't know that they can be fixed, but if someone has this gun maybe they want these barrels and forend. Forend is complete, but all the checkering is worn off.

[OLD GEEZER]

I'm looking for 10 Ga. barrels twist steel 30 inches in length 49091 Thanks Thomas

[Scott Gentry]

Looking for barrel for GH #1 frame, current barrels are pitted beyond safe use. A family gun that I would like to put back in service.

[George M. Purtill Member #28]

Originally Posted by Scott Gentry

Looking for barrel for GH #1 frame, current barrels are pitted beyond safe use. A family gun that I would like to put back in service.

This list is for reuniting missing parts. You are better served posting a WTB request with pictures of what you have. George

[John Cinkoske]

Greetings!
235896
Need the forend wood and tip for my DH 12 ga. 1-1/2 frame with ejectors.
Likely a splinter?
The original wood will likely be dark.
Someone put a BTFE on mine and didn't even come close with the color...

Or, I could use a similar used piece with the tip to put on my gun...
Thanks again for a great site!

[Herb Hewlett]

forend # 18777 0 grade I have it.