2 7/8" 10ga Reloading Data

[Paul Harm]

I use 21grs/Green Dot with 1 1/16oz of shot. The book shows 29 with 1 1/4oz, so I'm pretty sure I'm plenty safe. Many of the loads are out dated, but there is still many loads with available powders. You'll just have to make do, or as many of us do - use a 12ga load of moderate pressure - it will most certainly be safe in a 10ga [ larger chamber = less pressure ]. Good luck.

[OH Osthaus]

Tim.

Peters spread sheet is in be sticky at the top of this reloading forum

[Timothy Laycock]

Pardon me-- but WHERE are any stickies? Where is the PDF?? There is noting showing up on my computer , there is no spreadsheet. Please advise.

[Jack Pesci]

I had trouble finding this attachment as well. You must go to the top of the forum ( 2 7/8" 10 ga. Reloading Data) and click on the paper clip symbol on the right side of that title. Good luck.

[Snap Cap]

Tim, go to PGCA forums then Non-Parker Specific and General Discussions then Shotshell reloading and it will be the first sticky post. HTH FV

[Chip Beckford]

Hello , for some reason I can't get this to print/ Could someone send it to me?

Thanks ,

chip Beckford BeckfordMurray@gmail.com

[Harding nicholson]

I would like to download this data but am unable to see the link

[Dean Romig]

This is the link Pete originally posted for us...

http://www.hodgdonreloading.com/data/shotgun





.

[J.B. Books]

It's been awhile since I posted an updated Short Ten reloading spreadsheet. This one has been updated through Feb 2019. It includes loads PGCA members have had tested by Tom Armbrust and the new 2 7/8" 10ga data from Hodgdon. Please remember some of this data is very dated, some components including powder are no longer available on the shelf. Additionally some of these loads look very "hot" and I would not use them in any vintage gun especially one with composite barrels. Enjoy and use at your own risk.

[Jack Pesci]

Sorry, but I am at a loss in finding the attached, updated, pdf for the 10 ga. short shell data.
Please help me.