Question

[Angel Cruz Ortiz]

I have an Ithaca Flues model with extractors. What would make it hard to open once I fire both barrels? Most of the time is real hard to open, other times not so much. Again, this only happens after I fire the gun, the rest of the time it works fine.
Thanks in advance.
Angel…

[winplumber]

Do you have the same problem on empty chambers if not I would say its the shells sticking in the chambers

[Mike of the Mountain]

Shell heads expanding and sticking or firing pin(s) hanging up in primers

[J. Scott Hanes]

Steel heads on shotshells are prone to sticking in the chamber. Unless you are using Remington STS or Winchester AA shells, which are actual brass, you could have the problem. The steel heads expand and do not contract quickly if at all. Some brands have a brass plating that looks like brass but is not. Make sure the chambers are as clean as you can but that won't stop the sticking totally.

[Double Lab]

Firing pins.

[Bill Jolliff]

Originally Posted by Angel Cruz

I have an Ithaca Flues model with extractors. What would make it hard to open once I fire both barrels? Most of the time is real hard to open, other times not so much. Again, this only happens after I fire the gun, the rest of the time it works fine.
Thanks in advance.
Angel…

Not mentioned, but anytime you fire the gun on an empty chamber or live or fired shell, you have to compress and cock each dropped hammer spring which requires more effort. Just a thought.