Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums General Parker Discussions

Notices

Reply
Thread Tools Display Modes
Barrels Stuck Shut/Top Lever Issue
Unread 06-16-2024, 05:48 PM   #11
Member
Alan Ebright
Forum Associate

Member Info
 
Join Date: Jun 2024
Posts: 3
Thanks: 0
Thanked 2 Times in 1 Post

Default Barrels Stuck Shut/Top Lever Issue

I’ve shot 700 thru my 28ga Repro purchased in January. It had never been fired before I purchased it. Today I shot 50, and then at the next station, after firing both barrels independently, the barrels stuck shut. The top lever would move almost all the way to the right, but I couldn’t open the gun. Safety was stuck forward, and you could wiggle it a little bit, and the trigger would move in unison. This has a SST.
Once the gun cooled down, I took off the forend, and after a little finessing, it opened. However, when I move the top lever now, it’s not smooth. Kind of “skips” when I move it.
Thoughts?
Alan Ebright is offline   Reply With Quote
Unread 06-17-2024, 10:00 AM   #12
Member
Bill Murphy
PGCA Lifetime
Member Since
Second Grade

Member Info
 
Join Date: Jun 2009
Posts: 15,706
Thanks: 6,234
Thanked 8,990 Times in 4,809 Posts

Default

If the lever was to the right and the safety was forward, there is probably an interference with the automatic safety operating rod. Those who know more than me can confirm or deny. Good luck. I would remove that rod any time a gunsmith had the gun apart.
Bill Murphy is offline   Reply With Quote
Unread 06-17-2024, 03:07 PM   #13
Member
Alan Ebright
Forum Associate

Member Info
 
Join Date: Jun 2024
Posts: 3
Thanks: 0
Thanked 2 Times in 1 Post

Default

I worked the top lever and open/closed the action a few times. Didn’t dry fire w the snap caps for fear it would lock up again. Everything worked, but the top lever motion feels gummy and the action is really tight.
Alan Ebright is offline   Reply With Quote
Repro
Unread 06-17-2024, 04:13 PM   #14
Member
Scott Gentry
PGCA Member

Member Info
 
Join Date: May 2009
Posts: 386
Thanks: 168
Thanked 805 Times in 139 Posts

Default Repro

Had exact problem with a 20 Repro, gun got hot and would not open. Needs to be taken down and get the dried up grease/ oil cleaned out and lightly re oiled at right spots. Would not be shocked to see it double on occasion, have had to do this to 3 different un-shot guns.
Find someone familiar with doubles and single triggers, not average gunsmith.

Good luck.
Scott Gentry is offline   Reply With Quote
Needed repair VHE-12 to remove barrels
Unread 06-18-2024, 06:29 AM   #15
Member
SXS OHIO
PGCA Member

Member Info
 
Join Date: Nov 2008
Posts: 1,625
Thanks: 532
Thanked 1,922 Times in 538 Posts

Default Needed repair VHE-12 to remove barrels

I just had this issue. The reason the gun would not release the barrel hook to remove the barrels. I think from sitting i a heated safe for extended periods the lube or oils dried up and froze two moving parts. The for end indicator shaft that protrudes out of the receiver was stuck in and the slider mounted to the belly plate was also not moving. SEE PICS This was an easy fix but correct screw drivers are a must and may need hand fitted to the screws slots so not to booger them up! SXS Ohio
Attached Images
File Type: jpg IMG_7136.jpg (508.0 KB, 0 views)
File Type: jpg IMG_7138.jpg (527.0 KB, 1 views)
Kenny Graft is offline   Reply With Quote
The Following 3 Users Say Thank You to Kenny Graft For Your Post:
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:35 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.