Serial Number Mixup at Factory??

[edgarspencer]

Originally Posted by Brian Dudley

Full number is usually stamped on the buttplates.

And the latch and fore end tip

[B. Dudley]

Originally Posted by edgarspencer

And the latch and fore end tip

Yes, as per my original post listing these parts.

[Craig Larter]

I own a Parker the stamped number on the underside is correct, the engraved serial number on the bow is one digit off.

[Kevin McCormack]

I saw one many years ago at a firehouse gun show - the TG sn varied by one digit higher than the rest of the gun's numbers. It was a very tired but sound and original VH 20 gauge. Lots of caveat emptor angst and kvetching by the great unwashed over it.

[Researcher]

Not only in Meriden! My .410-bore Ithaca NID is 459135 everywhere except the stock wood which is stamped 457135.

[edgarspencer]

My sporting clays hammer 16 is X654X, but both hammers are stamped X754X.

[Craig Budgeon]

I suspect that there was one person in charge of numbering the soft metal parts before hardening with the exception of the trigger guard and wood. The person responsible must have been brilliant to make so few errors with such a repetitious job. After all Parkers were built long before the ISO 9000 quality standard.

[Gerald McPherson]

I have a problem when reading numbers with several digits and then writing them I often will switch or change one. There is a name for it but I don't remember what it is. Perhaps some of these workers were afflicted with it also.

[Dean Romig]

Dislexia




.

[Bill Murphy]

Gesundheit