410 O Frame?

[Bill Murphy]

It does not appear to me that the width of the action (wood) is mentioned in the chart. The wood may be 1 5/8" on the three smaller sizes, but the chart doesn't show it. Dean, no, the 00 frame .410 Scott and I discussed is not a prototype, nor do I believe it is unique. I just know I would like to own it, and will know it when I see it.

[Dean Romig]

233299 is a VHE .410





.

[Mills]

Classic Gunstocks has photos of a 20/28 DHE 2 barrel set on a 00 frame. They have photos on their Facebook page

[Dean Romig]

Never heard of a 20/28 on a 00-frame but I know of a few on the 0-frame. Just sayin’ I’ve never heard of a 20 gauge built on the 00-frame.

Maybe Ken can chime in here.



.

[edgarspencer]

Originally Posted by Dean Romig

Just sayin’ I’ve never heard of a 20 gauge built on the 00-frame.

If you're referring to Parker Repros, neither have I, but if you're referring to Parker Brothers, Of coarse you have. We just had a long discussion on this and you sent me pictures of one you knew of, and I had barrels, which are now in the hands of another member who has a couple 00 framed 20s.

[Dean Romig]

Originally Posted by edgarspencer

If you're referring to Parker Repros, neither have I, but if you're referring to Parker Brothers, Of coarse you have. We just had a long discussion on this and you sent me pictures of one you knew of, and I had barrels, which are now in the hands of another member who has a couple 00 framed 20s.

I don’t recall ever referring to a frame size in discussing the ones I know of...

Can you refresh me on that?





.

[edgarspencer]

Originally Posted by Dean Romig

I don’t recall ever referring to a frame size in discussing the ones I know of...

Can you refresh me on that?





.

http://parkerguns.org/forums/showthr...t=26215&page=3
It’s hard to say what you said in this thread as you deleted so many of your posts but in December we were texting about 00 framed 20 gauge guns, Dean Hansen has been posting about his and Austin Hogan had one. All of these were made before the actual “0” designation was developed.

[Mills]

The post said 00. Surprised me too

[Dean Romig]

Ooooh those... the pin spacing actually measured smaller than 00-frame spacing.

Moving ahead though, I thought this thread was about hammerless Parkers.





.

[Bill Murphy]

These were early hammer guns, correct? Is there a hammerless 20 on a 00 frame? Speaking of guns with barrels squeezed onto small frames, there are #1 frame tens and #000 frame 28s. This is information from the linked thread, repeated.