|
 |
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
07-13-2018, 02:35 PM
|
#3 | ||||||
|
To answer the original poster's question... Not really. The Trojan grade remained as we know it for the length of it's production run. The Trojan was an economy gun to begin with that had as many corners cut as possible in order to save on production labor costs. So, there was no more room to cut corners any farther than they already were.
The only cosmetic change that the Trojan had was the rib extension. The original guns had a simple straight extension and it was then completely eliminated within 5-7 years into production. Some find the rib extension interesting, some don't. nothing more than that. There were some internal changes to the gun such as the top lever spring design and the safety design, but these were changes implemented throughout Parker's whole line. Not just on the Trojans.
__________________
B. Dudley |
||||||
|
|
||||||
 |
 |
 |
| The Following 21 Users Say Thank You to Brian Dudley For Your Post: | Alfred Greeson, allen newell, Bill Jolliff, Daryl Corona, Donald McQuade, Garry L Gordon, Gary Carmichael Sr, Harry Collins, J. Scott Hanes, Jacob Duke, Jeff Christie, Jim Beilke, John Knobelsdorf II, keavin nelson, Marty Kohler, Mike Koneski, Paul Ehlers, Rick Riddell, Russell E. Cleary, todd allen, William Stewart |
|
|
|
07-13-2018, 03:05 PM
|
#4 | ||||||
|
I have a 20ga Trojan from the Remington era ,237,xxx serial number . Great gun and built as well as any other Parker I have. Not like Sterlingworth's that to me went down hill.
__________________
" May you build a ladder to the stars climb on every rung and may you stay forever young " Bob Dylan |
||||||
|
|
|
||||||
|
|
|
| The Following 3 Users Say Thank You to James L. Martin For Your Post: |
|
|
|
07-13-2018, 09:54 PM
|
#5 | ||||||
|
My father found this 20 gauge under the Christmas Tree. It is my favorite Parker.
|
||||||
|
|
|
||||||
|
|
|
| The Following 25 Users Say Thank You to Harry Collins For Your Post: | Alfred Greeson, allen newell, Daryl Corona, ED J, MORGAN, Eric Eis, Frank Cronin, Frank Good, Garry L Gordon, Gary Bodrato, Jacob Duke, Jerry Harlow, John Davis, Larry Stauch, Marty Kohler, matt koepnick, Mike Koneski, Mike McKinney, Rick Riddell, Russ Jackson, Russell E. Cleary, Scot Cardillo, scott kittredge, Steven Groh, todd allen, Wayne Owens |
|
|
|
07-13-2018, 10:47 PM
|
#6 | ||||||
|
The elimination of the Trojan's rib extension was yet another cost saving modification to the already 'cheapest' entry level hammerless gun that Parker made. By eliminating the rib extension it also eliminated the necessity of recessing the top of the frame to accept it. Further, the top rib could now be more cheaply made as a one-piece, full-length rib.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
|
|
|
||||||
|
|
|
| The Following 6 Users Say Thank You to Dean Romig For Your Post: |
|
|
|
07-13-2018, 10:50 PM
|
#7 | ||||||
|
When the Sterlingworth came out in 1910 it had a price of $25. The price stayed at $25 thru 1915, then climbed quickly to $55 by 1919. A.H. Fox Gun Co. reduced the price to $48 in 1922 and again to $36.50 in 1926. Workmanship of course declined.
Parker Bros. introduced their Trojan Grade at $25.50 in 1912. The Trojan’s price climbed like the Sterlingworth to $55. Parker Bros. kept the price and the quality of the Trojan high and sold about 33000 total. Fox began cutting the price of the Sterlingworth and sold well over 100000. |
||||||
|
|
|
||||||
|
|
|
| The Following 18 Users Say Thank You to Dave Noreen For Your Post: |
|
|
|
07-14-2018, 01:41 PM
|
#8 | ||||||
|
The quality of the Trojan didn't diminish over the years. It actually got a bit better with the enclosed top lever coil spring that replaced the old leaf spring as an example. The guns were always fit by hand. The wood to metal fit was better than on the Fox or L. C. Smith guns. I bought an original Trojan stock and tip wood for my deceased uncle's gun. Even though the serial number was only about 200 higher than my gun, I still had a lot of fitting to do on the tip and also the stock. I couldn't believe how much I had to work the new stock and tip to get them to fit properly. It took me a day to do working with scrapers and other tools. In my opinion, the Trojan was the finest field grade gun ever built in this country. Sorry to Kevin McCormack and other Fox lovers, but that is my opinion.
|
||||||
|
|
|
||||||
|
|
|
| The Following 11 Users Say Thank You to Tom Flanigan For Your Post: |
|
|
|
07-15-2018, 03:42 PM
|
#9 | ||||||
|
The Trojan was born as a result of James Hayes 1910-1911 “$25 gun project”.
At the time, all other manufacturers offered an entry level gun at that price point. Parker’s entry level gun at the time (the VH) was nearly double that price point.
__________________
B. Dudley |
||||||
|
|
|
||||||
|
|
|
| The Following 4 Users Say Thank You to Brian Dudley For Your Post: |
|
|
|
07-18-2018, 03:49 PM
|
#10 | |||||||
|
Quote:
|
|||||||
|
|
|
|||||||
|
|
|
 |
|
|
Linear Mode
